Fuel Flow Totalizer?

Fuel Flow Totalizer?

Postby William Hughes » Sat Aug 30, 2014 11:49 pm

I am installing tip tanks on the PA-24-250 this October. I have been musing about a flow meter and/or totalizer. Would you recommend just a flow indication, or a totalizer, or one of the more complex units? Any suggestions?
User avatar
William Hughes
 
Posts: 97
Joined: Mon Apr 21, 2014 9:23 pm
Location: Saskatoon, SK

Re: Fuel Flow Totalizer?

Postby N3322G » Sun Aug 31, 2014 2:01 am

William,

For decades we have used the Shadin fuel flow which also tracks fuel consumed and if hooked to a GPS, gives you gallons to destination. With the Osborne STC, it can replace the fuel flow gauge that came with the Comanche. http://www.shadin.com/products/fuel-flo ... /digiflo-l Some folks have chosen to leave the Piper Fuel flow gauge as a backup.

Even with the Shadin, if the flight is long enough to require a tank change, I still use a paper log for how much has been burned out of each tank and what remains in each tank.
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Re: Fuel Flow Totalizer?

Postby Kristin Winter » Sun Aug 31, 2014 4:05 am

I would certainly go with the totalizer. I too have a Shadin and it is accurate within 1%. I feel much better taking it down to my personal landing minimum of one hour at cruise, when I know I have an accurate total of fuel on board.
Kristin
User avatar
Kristin Winter
ICS member
ICS member
 
Posts: 1299
Joined: Tue Aug 09, 2005 5:21 pm
Location: Northern California


Return to Maintenance - Powerplant

Who is online

Users browsing this forum: No registered users and 16 guests

cron