 |
International Comanche Society A maintenance forum for ICS members to share knowledge and learn about their Comanche. Problems? - Contact Administrator at: Webmaster |
Sunvisor Mount
4 posts
• Page 1 of 1
Sunvisor Mount
by George Kretschmann » Mon Mar 04, 2013 2:47 am
I have lost one of the two sunvisor mounts for the left seat. The sunvisors are stock to the plane. I do need one for a pa30 1963 if anyone has one, or point me in the direction where I can purchase one. Thanks George
1963 PA-30
- George Kretschmann
- Posts: 148
- Joined: Fri Aug 24, 2012 12:27 am
- Location: Central Alabama
Re: Sunvisor Mount
by 9089P » Mon Mar 04, 2013 2:51 am
There is a member who is parting out a twin, posted in the last 2 months. I would expect he would have one of those items.
Good luck, Don
Good luck, Don
- 9089P
- ICS member
- Posts: 426
- Joined: Wed Jan 07, 2004 7:01 am
Re: Sunvisor Mount
by N3322G » Mon Mar 04, 2013 12:44 pm
George,
You also might try looking up the part number in the Parts Manual that's in the tech Tab on the ICS Home Page - then you can use it to search via Google.
ICS Tech Advisor www.ASOD.com has lots of parts and so does Webco.
You also might try looking up the part number in the Parts Manual that's in the tech Tab on the ICS Home Page - then you can use it to search via Google.
ICS Tech Advisor www.ASOD.com has lots of parts and so does Webco.
Pat
Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
-
N3322G - ICS member
- Posts: 1911
- Joined: Thu May 08, 2008 1:58 pm
- Location: Fort Worth, Texas area
Re: Sunvisor Mount
by Zach Grant L1011jock » Mon Mar 04, 2013 4:26 pm
George,
I assume you are looking for the part that has one mounting screw hole, a hole for the shaft of the visor, and a compression screw to adjust the resistance on the shaft, flat on the bottom mounting side. If that is the case I have two of them in my parts drawer. They are used servicable, painted black. If you need one, hows $10 plus shipping? PM me and we can talk (or my contact info is in the magazine...)
Zach
I assume you are looking for the part that has one mounting screw hole, a hole for the shaft of the visor, and a compression screw to adjust the resistance on the shaft, flat on the bottom mounting side. If that is the case I have two of them in my parts drawer. They are used servicable, painted black. If you need one, hows $10 plus shipping? PM me and we can talk (or my contact info is in the magazine...)
Zach
"Keep it above 5 feet and don't do nuthin dumb!"
-
Zach Grant L1011jock - Technical Advisor
- Posts: 1404
- Joined: Mon Mar 22, 2004 4:35 pm
- Location: Indianapolis KEYE
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 8 guests