vortex generators

Re: vortex generators

Postby md11flyer » Sun Jun 10, 2012 4:29 am

As an aside, fresh paint does make a difference! I thought my paint wasn't that bad, but after flying it home
at 10,000 ft,after the paint job, I picked up and additional 3-4 knots true airspeed over my previous flight with the old paint. Mind you that speed mod was one
of the most expensive :D Here are the stats of my flight home at 10000 ft, airspeed indicator indicating 176 knots true at 65% power, fuel burn 15.9 gallons per hour, running 50 degrees rich of
peak.

Gary
md11flyer
ICS member
ICS member
 
Posts: 330
Joined: Tue Mar 24, 2009 3:48 pm

Re: vortex generators

Postby MULEFLY » Sun Jun 10, 2012 1:06 pm

Gary... who did your paint? Not for the speed, but it is coming up on my "to do" list... pics?

Thanks
Jim
MULEFLY
ICS member
ICS member
 
Posts: 900
Joined: Tue Jan 25, 2000 1:34 am
Location: Wisconsin

Re: vortex generators

Postby jeffrey aryan » Sun Jun 10, 2012 4:42 pm

Gary,

Please tell us more about your paint job on a different thread. I would like to here more. What was good, bad, what you would do different, etc.

Thanks,

Jeff
jeffrey aryan
ICS member
ICS member
 
Posts: 243
Joined: Fri Jan 30, 2004 5:21 am
Location: Chino, CA (So-Cal)

Re: vortex generators

Postby md11flyer » Sun Jun 10, 2012 8:46 pm

OK, will do.

Gary
md11flyer
ICS member
ICS member
 
Posts: 330
Joined: Tue Mar 24, 2009 3:48 pm

Previous

Return to Maintenance - General

Who is online

Users browsing this forum: No registered users and 16 guests

cron