I know of two 180 owners, (including me), that would be very interested in a IO-390 or IO-360 STC.
bbowlsbey@yahoo.com or bryan.w.bowlsbey@us.army.mil
 |
International Comanche Society A maintenance forum for ICS members to share knowledge and learn about their Comanche. Problems? - Contact Administrator at: Webmaster |
pa-24-180 with IO-360-A1A 200 hp conversion
6 posts
• Page 1 of 1
pa-24-180 with IO-360-A1A 200 hp conversion
by 5173P » Tue Oct 27, 2009 12:28 am
- 5173P
- ICS member
- Posts: 1
- Joined: Mon Oct 26, 2009 11:40 pm
by Hansmeister » Tue Oct 27, 2009 3:54 am
-
Hansmeister - ICS member
- Posts: 802
- Joined: Thu Jun 27, 2002 5:44 pm
- Location: Kah-li-forn-yah
-
Zach Grant L1011jock - Technical Advisor
- Posts: 1404
- Joined: Mon Mar 22, 2004 4:35 pm
- Location: Indianapolis KEYE
IO-390 or IO360 STC for pa-24-180
by Bryan Bowlsbey » Tue Apr 05, 2011 4:13 am
- Bryan Bowlsbey
- Posts: 17
- Joined: Thu Feb 10, 2011 2:54 am
Re: pa-24-180 with IO-360-A1A 200 hp conversion
by Robert Flanagan » Sat Oct 01, 2011 9:33 pm
Does anybody know if this got approved?
- Robert Flanagan
- ICS member
- Posts: 11
- Joined: Sat Nov 01, 2008 11:52 pm
- Location: Willows, California
Re: pa-24-180 with IO-360-A1A 200 hp conversion
by Don Nelson » Sun Oct 02, 2011 5:34 pm
If Miller could put 2 IO-360's in place of the IO-320's on my Twin Comanche - it doesn't seem much of a stretch to convert an already 0-360 to an IO-360 with a little more HP.
Especially to an airframe already certified for an IO-540.
And with a few other mod's, for an IO-720!
Probably all in finding the FAA guy who's truly "here to help".
Sounds like fun, but Good Luck!
Don
Especially to an airframe already certified for an IO-540.
And with a few other mod's, for an IO-720!
Probably all in finding the FAA guy who's truly "here to help".
Sounds like fun, but Good Luck!
Don
-
Don Nelson - ICS member
- Posts: 312
- Joined: Mon Nov 10, 2003 5:57 pm
- Location: Burlington, Washington; KBVS
6 posts
• Page 1 of 1
Return to Maintenance - Powerplant
Who is online
Users browsing this forum: No registered users and 9 guests