Static On the Radio's

Static On the Radio's

Postby Billy Matthews » Mon Jun 20, 2011 5:11 pm

Man I hope that I have posted this in the right place:

I have a KY97 Comm incoming tramsmissons are loud and clear but out going are garbbled and unreadable when I use the push to talk and when I use a hand held Mike:

Any Ideas as to what may be causing this ?

Thanks
Billy
Billy Matthews
ICS member
ICS member
 
Posts: 28
Joined: Fri Jul 23, 2010 3:06 pm

Re: Static On the Radio's

Postby AlanBreen » Tue Jun 21, 2011 12:11 am

Sounds like you have use two different mics so I would check the aerial, it might have a poor ground connection.

Do you have another radio in the aircraft? If so how well does it work?

Some radios are very susceptable to the power supply voltage when transmitting. Perhaps you have a poor connection on the power supply to the radio.
User avatar
AlanBreen
ICS member
ICS member
 
Posts: 557
Joined: Thu Jun 27, 2002 6:57 am
Location: Hamilton, New Zealand

Re: Static On the Radio's

Postby tomburke1 » Mon Jun 27, 2011 1:50 am

Radio's do drift off frequency after time. The 175's had 2 chrystals that controled them, that when they failed you got those symptoms.
tomburke1
ICS member
ICS member
 
Posts: 112
Joined: Mon Sep 15, 2003 2:30 pm
Location: Fort Lauderdale fl


Return to Maintenance - Avionics

Who is online

Users browsing this forum: No registered users and 21 guests