Cabin Ventilation Eyelets

Cabin Ventilation Eyelets

Postby Kristofer Duckett » Sun Jan 09, 2011 6:45 am

Has anyone changed the cabin vent eyelets at the top of the ccabin and on the sides with redoing the entire vent system? Can the eyeballs vents and the sad side vents be replaced easily and if so what types are best fo ventilation?

Kris
Kristofer Duckett
ICS member
ICS member
 
Posts: 98
Joined: Thu Aug 05, 2010 6:52 am

Re: Cabin Ventilation Eyelets

Postby Kristofer Duckett » Sun Jan 09, 2011 6:46 am

Sorry by the way I have a 63' commanche 250. Original interior.
Kristofer Duckett
ICS member
ICS member
 
Posts: 98
Joined: Thu Aug 05, 2010 6:52 am

Re: Cabin Ventilation Eyelets

Postby Jay » Mon Jan 10, 2011 12:53 am

At some point in the distant past a previous owner of my airplane installed aluminum Wemac valves in N7702Y. A quick Google search located them at Chief, but lots of suppliers carry them. I'll leave it to an I/A to discuss the logging requirements.

Jay
Attachments
WEM_2373-1.jpg
Jay
PA 30 N7702Y
User avatar
Jay
ICS member
ICS member
 
Posts: 473
Joined: Tue Sep 30, 2003 10:59 pm
Location: Portland, Oregon

Re: Cabin Ventilation Eyelets

Postby Andrew Foster » Tue Jan 11, 2011 2:11 am

We have a 61 250. We replaced the overhead vents with 90 degree vents from aircraft spruce. They have a 1" diamater hose which works well with the exsisting plumbing

http://www.aircraftspruce.com/catalog/a ... invent.php

They open and close, but do not swivel
Andrew Foster
ICS member
ICS member
 
Posts: 161
Joined: Fri Dec 31, 2004 9:22 pm

Re: Cabin Ventilation Eyelets

Postby Paul Cissel » Tue Apr 11, 2017 6:10 pm

i need to replace my pilot and copilot eyeball vents in my 1970 twin comanche. any direction on any of the plastic vents at Spruce? do these need an elbow or tube to feed it?

(modernizing this thread 6 years later)
Paul Cissel
 
Posts: 6
Joined: Fri May 22, 2015 9:31 pm

Re: Cabin Ventilation Eyelets

Postby Zach Grant L1011jock » Fri Apr 14, 2017 5:25 pm

No. The Twins have no ducting from the panel to the vents other than the plastic trim.

Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE


Return to Maintenance - Airframe

Who is online

Users browsing this forum: No registered users and 27 guests