oil change etc.

Re: oil change etc.

Postby mdelaware » Thu Jan 06, 2011 10:10 pm

Hi Don,
I noticed I wrote "transmission oil filter funnel". I meant transmision oil funnel it is long and slender. I trimmed it lenghth wise thin enough to slide under the oil filter. The filter will lay across the funnel under it not lenghth wise under the filter. Hope this helps.
Mark
mdelaware
ICS member
ICS member
 
Posts: 2
Joined: Mon Jul 06, 2009 8:55 pm

Re: oil change etc.

Postby 9089P » Thu Jan 06, 2011 10:35 pm

Thanks Mark, that helps. I will be stopping at NAPA (National Air Parts Association) on the way to the airport.

Don
9089P
ICS member
ICS member
 
Posts: 426
Joined: Wed Jan 07, 2004 7:01 am

Re: oil change etc.

Postby Gus » Thu Jan 20, 2011 4:02 pm

Elliot,
I have a very easy way to contain the oil spill from the filter. What you do is take an empty quart oil container and with a scissor or razor cut the face of the container around the label thereby leaving a half inch rim around the container. Leaving the cap on you then place the container under the filter before removal, and you can catch any oil spill from the filter. On my plane it wedges in perfecty without having to hold it while you're removing the filter.
Gus
User avatar
Gus
ICS member
ICS member
 
Posts: 23
Joined: Wed Jan 21, 2009 2:46 am

Previous

Return to Maintenance - Powerplant

Who is online

Users browsing this forum: No registered users and 3 guests

cron