High Fuel Flow....intermittent rough engine

High Fuel Flow....intermittent rough engine

Postby John Wasserburger » Wed Mar 03, 2010 12:00 am

I have a problem with my left engine on my 1966 Pa-30B. The fuel flow is noticeably higher on the left engine than the right engine at all power settings and gets progressively greater at higher settings. The engine intermittently runs rough/stumbles a few times than recovers to almost normal power. I had my A&P clean the fuel injectors (stock) and this helped for about 5 minutes but then it went back to the same symptoms. Has anybody had a similar circumstance with their aircraft? I am thinking of sending the fuel servo for overhaul. I did replace the fuel gauge with a new gauge. Thanks for any help!

John Wasserburger
John Wasserburger
ICS member
ICS member
 
Posts: 62
Joined: Mon Oct 27, 2008 9:12 pm

Postby Zach Grant L1011jock » Wed Mar 03, 2010 2:22 am

"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Postby John Wasserburger » Wed Mar 03, 2010 4:28 am

John Wasserburger
ICS member
ICS member
 
Posts: 62
Joined: Mon Oct 27, 2008 9:12 pm

Postby John Wasserburger » Wed Mar 03, 2010 9:59 am

John Wasserburger
ICS member
ICS member
 
Posts: 62
Joined: Mon Oct 27, 2008 9:12 pm

Postby Zach Grant L1011jock » Wed Mar 03, 2010 2:56 pm

"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Postby John Wasserburger » Wed Mar 03, 2010 7:13 pm

John Wasserburger
ICS member
ICS member
 
Posts: 62
Joined: Mon Oct 27, 2008 9:12 pm

Postby John Wasserburger » Fri Mar 19, 2010 6:32 am

Update to problem: It appears that the fuel divider had some rust contaminates so we cleaned it up and blew out the lines. Everything is working normally as of now. Thanks for all the help and ideas!

John
John Wasserburger
ICS member
ICS member
 
Posts: 62
Joined: Mon Oct 27, 2008 9:12 pm

Rough engine

Postby 15384 » Sat Apr 03, 2010 3:25 pm

15384
ICS member
ICS member
 
Posts: 115
Joined: Wed Nov 26, 2003 5:06 pm


Return to Maintenance - Powerplant

Who is online

Users browsing this forum: No registered users and 4 guests

cron