avionics recommendations?

430 vs 530

Postby tomburke1 » Sat Jan 02, 2010 3:01 pm

I noticed that his 1st post mentioned his DME going toes up. I just wanted to let him know that the 530 had DME capabilities anf the 430 didn't.
Whether the additional cost is worth it or not is really a decision for the buyer and what he wants in his aircraft. I chose both because that's what I wanted.
tomburke1
ICS member
ICS member
 
Posts: 112
Joined: Mon Sep 15, 2003 2:30 pm
Location: Fort Lauderdale fl

Postby Alan Cheak » Sat Jan 02, 2010 3:19 pm

A Garmin 480 also provides this viture of giving you the DME of the station your locked on too. Only problem is that its a bugger trying to get your hand on a 480 unit.

Sincerely Alan
Attachments
Flying SD to Bryce 017.jpg
A good loser... is still a loser.
User avatar
Alan Cheak
ICS member
ICS member
 
Posts: 142
Joined: Sun Jan 12, 2003 8:17 pm
Location: Peachtree City, GA KFFC

Postby Jay » Sat Jan 02, 2010 9:03 pm

The 430 as well as the 530 and 480 does provide DME information that, so long as the installation is IFR certified, can be used to replace a separate DME. The 430 just doesn't have as good a display as either the 530 or the 480.

Among the 480's other nice features is that during an approach is provides constant relative bearing (an arrow) and distance to the end of the runway in addition to the distance to the next waypoint.

So far as I know the only time that GPS derived distance can't be substituted for DME legally is when flying a DME arc that is part of the final approach segment. Not an arc to intercept the final approach course, but an arc that IS the final approach course. And so far as I know, there is only one approach in the US that is set up that way. If you are feeling cocky, go fly this one!

http://204.108.4.16/d-tpp/0913/05222VDTZ15.PDF

Jay
Jay
PA 30 N7702Y
User avatar
Jay
ICS member
ICS member
 
Posts: 473
Joined: Tue Sep 30, 2003 10:59 pm
Location: Portland, Oregon

Postby davesturm » Wed Aug 04, 2010 11:06 pm

davesturm
ICS member
ICS member
 
Posts: 9
Joined: Thu Jul 29, 2010 7:17 pm

Old Avionic thread - renewed

Postby Tony Scarpelli » Sat Sep 04, 2010 10:01 pm

Tony Scarpelli
ICS member
ICS member
 
Posts: 111
Joined: Thu May 08, 2008 11:47 am

Postby Zach Grant L1011jock » Sun Sep 05, 2010 3:09 am

"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Postby 9089P » Sun Sep 05, 2010 3:35 am

9089P
ICS member
ICS member
 
Posts: 426
Joined: Wed Jan 07, 2004 7:01 am

Postby Zach Grant L1011jock » Sun Sep 05, 2010 3:41 am

"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Postby Tony Scarpelli » Sun Sep 05, 2010 5:09 am

Tony Scarpelli
ICS member
ICS member
 
Posts: 111
Joined: Thu May 08, 2008 11:47 am

Postby 9089P » Sun Sep 05, 2010 6:10 am

9089P
ICS member
ICS member
 
Posts: 426
Joined: Wed Jan 07, 2004 7:01 am

Previous

Return to Maintenance - Avionics

Who is online

Users browsing this forum: No registered users and 20 guests