International Comanche Society

A maintenance forum for ICS members to share
knowledge and learn about their Comanche.

Problems? - Contact Administrator at: Webmaster

Turbo Mounts

Post a reply

Turbo Mounts

Postby Darrin Henry » Fri Dec 11, 2009 4:04 pm

Darrin Henry
ICS member
ICS member
 
Posts: 27
Joined: Wed Feb 11, 2009 10:24 pm
Top

Postby Zach Grant L1011jock » Sat Dec 12, 2009 5:38 am

Simple answer, make it fit without interference.....

The turbo and exhaust can be rotated prior to securing the clamps,and that can alieviate many of these interference issues. If you are going to remove the clamos and rotate, you will need new gaskets, just FYI. Each of these planes were hand made so some creativity may be required. There should not be any interference.
-Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE
Top

turbo Mounts

Postby Darrin Henry » Sun Dec 13, 2009 9:29 pm

When you say rotate the turbo, Are you referring to the clamp between the hot and cold section of the turbo, or is there adjustment in the mounting bracket??
Thanks Darrin
Darrin Henry
ICS member
ICS member
 
Posts: 27
Joined: Wed Feb 11, 2009 10:24 pm
Top

Postby Zach Grant L1011jock » Mon Dec 14, 2009 6:21 pm

"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE
Top
Post a reply

Return to Maintenance - Powerplant

Who is online

Users browsing this forum: No registered users and 27 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
cron