NEW PROP RECOMMENDATIONS

NEW PROP RECOMMENDATIONS

Postby Nathan Dudley » Fri Jul 10, 2009 12:21 am

I'm in the midst of an annual. 500 hr. inspection AD on prop done. Bad news! $7000 to fix prop. Would rather spend on new prop.

What would you recommend?
Where can I find the best deal?
Are there any other solutions? Perhaps a place to get a good rebuilt prop.

This is for a 1960 PA 24-250. O-540 A1D5

Thanks for any advice you can give on this major decision I must make.
Nathan Dudley
ICS member
ICS member
 
Posts: 4
Joined: Tue Feb 03, 2009 11:16 pm

Postby Zach Grant L1011jock » Fri Jul 10, 2009 2:56 am

Choice is really between a Hartzell 3 bld, and a MacCauley 3 bld. Personal preference on which manufaturer to go with. Both are good props. MacCauley has had no ADs on their props...and the design is just better IMHO, but the 3 bld Hartzell may be a bit smoother running (from those that have flown both).

-Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Postby Alan Cheak » Fri Jul 10, 2009 4:11 am

I got the Blac Mac for about $7000 as I recall from Colorado Propeller. This was when the Blac Mac first game out. Great prop. No problems.

Alan
A good loser... is still a loser.
User avatar
Alan Cheak
ICS member
ICS member
 
Posts: 142
Joined: Sun Jan 12, 2003 8:17 pm
Location: Peachtree City, GA KFFC

Postby ics-12766 » Fri Jul 10, 2009 2:32 pm

Hmmm... 3-bl vs 2-bl. Personally, given a choice, I'd go with 2. A little faster, I think, and one less blade to maintain, same prop diameter (ground clearance), AFAIK.

But... The 3-bl Mac sure looks good on the ramp :)
Rich Clover
User avatar
ics-12766
ICS member
ICS member
 
Posts: 277
Joined: Fri Oct 22, 2004 6:10 am
Location: Evanston, WY (KEVW)

Postby 9089P » Fri Jul 10, 2009 5:17 pm

9089P
ICS member
ICS member
 
Posts: 426
Joined: Wed Jan 07, 2004 7:01 am

Postby Nathan Dudley » Fri Jul 10, 2009 7:10 pm

Nathan Dudley
ICS member
ICS member
 
Posts: 4
Joined: Tue Feb 03, 2009 11:16 pm

Postby ics-12766 » Sat Jul 11, 2009 1:31 am

Rich Clover
User avatar
ics-12766
ICS member
ICS member
 
Posts: 277
Joined: Fri Oct 22, 2004 6:10 am
Location: Evanston, WY (KEVW)

Postby 9089P » Sat Jul 11, 2009 6:27 am

9089P
ICS member
ICS member
 
Posts: 426
Joined: Wed Jan 07, 2004 7:01 am

Postby Nathan Dudley » Sat Jul 11, 2009 5:29 pm

Nathan Dudley
ICS member
ICS member
 
Posts: 4
Joined: Tue Feb 03, 2009 11:16 pm

Postby Don Ostergard » Sat Jul 11, 2009 5:51 pm

Don Ostergard
ICS BOD member
ICS BOD member
 
Posts: 63
Joined: Sat Nov 20, 2004 6:59 pm

Postby Nathan Dudley » Sun Jul 12, 2009 3:35 am

Nathan Dudley
ICS member
ICS member
 
Posts: 4
Joined: Tue Feb 03, 2009 11:16 pm


Return to Maintenance - Powerplant

Who is online

Users browsing this forum: No registered users and 22 guests

cron