Master brake cylinder leaks

Master brake cylinder leaks

Postby Jeff » Sat Jun 01, 2013 9:25 pm

I have noticed small amounts of HYD fluid around the bottom of the left master cylinder and at one line connection point on my 1966 Turbo twin Comanche. Do these issues normally require a new cylinder or rebuild/changing of "O" rings? Any recommendations of shops/mechanics in WI, NE, or SD who are very well versed with the Twin Comanche? Thanks
Jeff
ICS member
ICS member
 
Posts: 17
Joined: Tue May 11, 2010 4:23 am
Location: Fountain Hills, AZ

Re: Master brake cylinder leaks

Postby N3322G » Sun Jun 02, 2013 1:51 pm

Jeff,

Yes, these do occasionally need attention. Mine were repaired with new o-rings but it took 4 attempts at two different shops. If I had it to do over again, I'd buy new because the labor made repair uneconomical and I dislike the repetitive downtime.

Great shop up that way is Heritage Aero at Rockford IL. Owner Cliff is an ICS Tech Advisor.
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Re: Master brake cylinder leaks

Postby Jeff » Sun Jun 02, 2013 11:27 pm

Thank you Pat. I agree the labor and down time might make this more trouble than it is worth.
Jeff
Jeff
ICS member
ICS member
 
Posts: 17
Joined: Tue May 11, 2010 4:23 am
Location: Fountain Hills, AZ

Re: Master brake cylinder leaks

Postby bernard nowlen » Sun Jun 02, 2013 11:47 pm

A cleveland "O" ring rebuild kit from spruce is $32.50 (each). I'm going to attempt to do this with my I/A this weekend. A new master cylinder is $2370 (each). Cleveland must really think their parts are special. For $65.00 I'll try the rebuild first.
Bernie
bernard nowlen
 
Posts: 79
Joined: Sat Jun 02, 2012 3:52 pm

Re: Master brake cylinder leaks

Postby Jeff » Mon Jun 03, 2013 7:09 am

Thank you Bernie. I will talk with the shop, which maintains my aircraft this week to get their recommendation as well as WEBCO.
Jeff
Jeff
ICS member
ICS member
 
Posts: 17
Joined: Tue May 11, 2010 4:23 am
Location: Fountain Hills, AZ


Return to Maintenance - General

Who is online

Users browsing this forum: No registered users and 38 guests

cron