Robertson STOL - positive flap retraction

Robertson STOL - positive flap retraction

Postby Timothy Urban » Thu Nov 30, 2017 5:12 pm

The Robertson STOL system for PA-30s is limited to 15 degrees flaps unless a subsequent positive flap retraction system was installed. Am looking for the Robertson Service Bulletin #19, and advice as to how you can look at the plane and tell if the positive flap system is installed in your plane (other than absence of a placard on your flap switch).

Thx in advance for any PDFs, photos, etc.

Tim
Timothy Urban
 
Posts: 7
Joined: Sat Nov 25, 2017 6:10 am

Re: Robertson STOL - positive flap retraction

Postby Timothy Urban » Mon Dec 04, 2017 2:55 am

FYI for the next guy searching this topic, the Robertson service letter #19 is available through Lancair in Uvalde, TX. More positive flap retraction system kits may be built sometime in 2018 but no new ones are available at this time.
Timothy Urban
 
Posts: 7
Joined: Sat Nov 25, 2017 6:10 am

Re: Robertson STOL - positive flap retraction

Postby John Otten » Sat Dec 09, 2017 3:49 pm

Hey guys, on the Robertson STOL topic. Would anyone here happen to have the flight manual supplement available, recently purchased PA-30 seems to be missing it. I've contacted the current STC holder with no help as of yet,thanks
John
John Otten
 
Posts: 2
Joined: Wed Nov 15, 2017 6:12 am

Re: Robertson STOL - positive flap retraction

Postby Timothy Urban » Sun Dec 10, 2017 10:45 pm

For people reading the thread: I have the Robertson AFMS, the Robertson service manual, and the service letter on the positive flap retraction kit.

John - Can u email me your address, and I will reply with attachments?

Best

Tim
Timothy Urban
 
Posts: 7
Joined: Sat Nov 25, 2017 6:10 am

Re: Robertson STOL - positive flap retraction

Postby John Otten » Mon Dec 11, 2017 1:10 pm

Thanks Tim, email sent.
John Otten
 
Posts: 2
Joined: Wed Nov 15, 2017 6:12 am


Return to Maintenance - General

Who is online

Users browsing this forum: No registered users and 10 guests

cron