gear lights

gear lights

Postby Robert Flanagan » Tue Oct 10, 2017 5:49 am

I no longer get an up light or a green down light. The gear retracts and extends fine, any ideas
Robert Flanagan
ICS member
ICS member
 
Posts: 11
Joined: Sat Nov 01, 2008 11:52 pm
Location: Willows, California

Re: gear lights

Postby LeWayne Garrison » Sat Oct 14, 2017 3:48 am

possible causes. If both lights not working, unlikely both bulbs burned out same time. Check switches on gear mechanism. Possible one switch is broken, more likely a broken wire to any of the switches. Any switch not sending the proper signal will cause the light to not come on. Also, make sure the position lights are not on, have seen this. If position lights on, gear lights dim so much they are very difficult to see in daylight
LeWayne Garrison
 
Posts: 73
Joined: Tue Aug 16, 2011 3:37 am

Re: gear lights

Postby OregonBill » Wed Oct 18, 2017 2:15 pm

I had this problem with the position lights on, apparently due to the rheostat in the switch being burnt out. With position lights off, gear indicator lights are fine.
OregonBill
ICS member
ICS member
 
Posts: 1
Joined: Fri Jul 11, 2008 4:11 pm


Return to Maintenance - Airframe

Who is online

Users browsing this forum: No registered users and 20 guests

cron