Toe brakes

Toe brakes

Postby Charles Lemmon » Fri Jun 23, 2017 5:21 pm

My 1958 Comanche needs toe brakes.
Charles Lemmon
 
Posts: 4
Joined: Fri Jun 23, 2017 5:18 pm

Re: Toe brakes

Postby Pat Donovan » Mon Jun 26, 2017 10:27 pm

Hi Charles,

I've had two Comanches; one without and one with toe brakes. I didn't find any real difference from an operational standpoint. Considering the turn radius is defined by the nose strut limiting stop, the only real time where differential braking might help is if there is excess drag on one side that needs to be compensated for by braking on the other -- think flat tire on roll out (got the T-shirt) which fortunately doesn't happen that often.

You probably need to visit the various salvage yards to get the parts.

Pat D
User avatar
Pat Donovan
ICS Treasurer
ICS Treasurer
 
Posts: 93
Joined: Sun Jul 11, 2004 3:32 pm
Location: Troy, MO

Re: Toe brakes

Postby Zach Grant L1011jock » Sat Jul 01, 2017 6:47 pm

Charles,
No 1958 Comanche needs toe brakes... In all honesty you would be better off finding an airplane with them already installed (61 or later). I'm pretty sure they built the airplane around the master cyl. mounts on the firewall...

Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Re: Toe brakes

Postby Charles Lemmon » Wed Jul 12, 2017 12:01 am

Well I've found a complete set of toe brakes (pedals, cylinders,etc) on ebay. Is there an existing STC for retrofitting these onto my '58
Charles Lemmon
 
Posts: 4
Joined: Fri Jun 23, 2017 5:18 pm

Re: Toe brakes

Postby Zach Grant L1011jock » Wed Jul 12, 2017 12:15 am

Is it a Comanche system? If it is you can install them on the airplane as long as you use all the parts as called for in the parts manual, and installed as per the Piper drawings, then it is just a logbook entry. Installing these are a BIG job. If you are thinking about using a brake system out of another type aircraft, don't waste your money as you will need a field approval and you won't get one.

Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Re: Toe brakes

Postby LeWayne Garrison » Wed Jul 12, 2017 12:38 am

If it is a Comanche system, a logbook entry is all that is required. If it is not it will require a field approval. Depending on your area's FSDO it could well be impossible to get. Some FSDO's are easier to deal with than others, but none I know of are easy to get a field approval on something like that.
LeWayne Garrison
 
Posts: 73
Joined: Tue Aug 16, 2011 3:37 am

Re: Toe brakes

Postby Charles Lemmon » Wed Jul 12, 2017 7:00 pm

Thanks gentlemen. The toe brakes that I bought were taken out of a Comanche, pa24-250. My mechanic has installed them before so i should be good to go.
Charles Lemmon
 
Posts: 4
Joined: Fri Jun 23, 2017 5:18 pm


Return to Want to buy

Who is online

Users browsing this forum: No registered users and 1 guest

cron