Hello all,
I plan to install a NSD-360 in our panel. Our Comanche is equipped with a Chelton AP-3C autopilot.
Unfortunately the Chelton manual only references the wiring to a 52D54 directional gyro.
I would be happy if someone can help me how to connect the Chelton with the NSD-360.
Attached áre the wiring diagrams.
All the best
Christian
ICS #18673
 |
International Comanche Society A maintenance forum for ICS members to share knowledge and learn about their Comanche. Problems? - Contact Administrator at: Webmaster |
HSI NSD-360 Installation
3 posts
• Page 1 of 1
HSI NSD-360 Installation
by Christian Bayerlein » Wed Jan 06, 2016 10:51 pm
- Attachments
-
NSD-360-Wiring.pdf- (2.07 MiB) Downloaded 117 times
-
- Chelton_Wiring_Diagrams_Cable_Routing.pdf
- (402.19 KiB) Downloaded 102 times
-
- AP3C-1004-003ir-01 Model (NSD-360).pdf
- (68.98 KiB) Downloaded 77 times
Last edited by Christian Bayerlein on Tue Jan 19, 2016 11:35 pm, edited 1 time in total.
-
Christian Bayerlein - Posts: 12
- Joined: Fri Dec 18, 2015 12:04 am
- Location: Bavaria
Re: HSI NSD-360 Installation
by comancheeflyer » Mon Jan 18, 2016 4:40 am
It can be. done but you will only be able to use the heading bug for heading and nav function, unless the autopilot has some means of separating the two functions.
- comancheeflyer
- ICS member
- Posts: 8
- Joined: Mon Sep 27, 2004 7:03 pm
Re: HSI NSD-360 Installation
by Christian Bayerlein » Tue Jan 19, 2016 11:38 pm
-
Christian Bayerlein - Posts: 12
- Joined: Fri Dec 18, 2015 12:04 am
- Location: Bavaria
3 posts
• Page 1 of 1
Return to Maintenance - Avionics
Who is online
Users browsing this forum: No registered users and 35 guests