FUEL GAUGE

FUEL GAUGE

Postby Dimitri Mamais » Thu Oct 01, 2015 6:58 pm

Looking for wiring diagram Pa-30C fuel indicating.Right main and aux tank fuel gauge reads full regardles of fuel quantity.When fuel selector selected to off the gauge indicates off.
Dimitri Mamais
ICS member
ICS member
 
Posts: 1
Joined: Thu May 27, 2010 8:36 pm

Re: FUEL GAUGE

Postby N3322G » Thu Oct 01, 2015 7:40 pm

Dimitri,

All these are in the service manuals -see the home page for a free copy under the tech tab.

Be sure to check the grounding on your senders and grounding in general. Senders may also need adjustment and there is a procedure for that in the service manual.
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Re: FUEL GAUGE

Postby Randy Johnson » Fri Oct 02, 2015 7:44 pm

With a bad ground, the gauge reads absolutely full no matter how much gas is in the tank . That's where I would start troubleshooting.
User avatar
Randy Johnson
 
Posts: 176
Joined: Thu Apr 14, 2011 1:57 am
Location: Boston Area (BEV)

Re: FUEL GAUGE

Postby Zach Grant L1011jock » Fri Oct 09, 2015 9:03 pm

Yes, an open circuit if full scale full, and a short goes to empty. Higher the resistance, the fuller the tank...
-Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE


Return to Maintenance - General

Who is online

Users browsing this forum: No registered users and 37 guests