Need Spinner for 260 Comanche

by **Jerry Fitzgerald** » Sun Nov 02, 2014 8:14 pm

Looking to buy a spinner for my 1964 Comanche 260.
Two prop

by **Tim Weigle** » Mon Nov 03, 2014 2:35 am

Jerry,
I have a spinner and backing plate I removed from my 61 250 when I installed a new 3 blade prop. I can send you pictures of it if you think it will fit. The engine is the O-540 with a Hartzell 2 blade. It's painted blue.

Tim

by **jeffrey aryan** » Mon Nov 03, 2014 5:15 am

Try TCB Composites they might have one for you.

Jeff Aryan

by **Jerry Fitzgerald** » Mon Nov 03, 2014 7:20 pm

Tim

I have a 250 spinner that came with the plane and would like a 260 spinner. The prop holes are smaller on the 260 spinner.

Jeff

Looking at the TCB Composites prefer aluminum but may have to go that route.

Thanks for the replies

by **Jerry Fitzgerald** » Tue Nov 04, 2014 4:30 am

Think I am going to go with a 3 blade

HC-C3YR-1RF/F7590

Any comments are welcome

Need Spinner for 260 Comanche

Need Spinner for 260 Comanche

Re: Need Spinner for 260 Comanche

Re: Need Spinner for 260 Comanche

Re: Need Spinner for 260 Comanche

Re: Need Spinner for 260 Comanche

Who is online