Baffles

[Andrew Foster]

In the process of doing our baffles on a 61 250.
Had Matt make my front baffles and am in the process of fabricating and fitting the side baffles. The rear ones are ok.
So, as a picture is worth a thousand words....
If anyone wants to post a couple of pics of your baffles, In particular the flexible layout it would be greatly appreciated
After all imitation is the sincerist form of flattery

Thanks so much
Andrew

[N3322G]

Andrew,

I used photos of several kind ICS members of their Twin Comanche baffles as inspiration for ours. While the photos are for Twins, the approach might give you some ideas. Go to page 4 about halfway down to see the photos and then double click to get the full crisp picture. Hope this helps.
http://www.comancheflyer.com/forum2/vie ... les#p47838

You might try using the upper right corner search box on baffles to see other discussions here and on the chat Forum.

[Andrew Foster]

Pat,
thanks for the help, unfortunately teh link did not work. Can you type out the address so I can paste and copy?
Thanks

Andrew

[N3322G]

Andrew,
Try this. http://www.comancheflyer.com/forum2/vie ... les#p47838

If that doesn't work, go to the ICS Chat Forum, key Baffles in the upper right search box and look for Belly Meets Blacktop and click on Jump to post.