piano hinge

piano hinge

Postby Fred Whitacre » Wed May 01, 2013 3:08 pm

The passenger door on my 250 has a piano hinge.
My mechanic says it is not faa approved. I searched
"piano hinge" on this site and see that some of us do
have doors with the piano hinge,and one person sent
a form 337 to ics.

Anybody know anything about this subject?

fred
Fred Whitacre
ICS member
ICS member
 
Posts: 3
Joined: Tue Feb 02, 2010 3:02 am

Re: piano hinge

Postby N3322G » Wed May 01, 2013 3:21 pm

Hi Fred,

Welcome to the Forum. I see this is your first post here.

Looked you up in Pathfinder - we aren't too far from you. If you don't get an answer here and want a qualified second opinion, you can email an ICS Tech Director http://www.comancheflyer.com/NS/tq.php or if you are going to do business with a highly knowledgeable Comanche shop, call Clifton Aero - they are a bit south of Ft Worth at 7F7 http://cliftonaero.com/

I know there is a way to do this legally as I've considered it for my twin as I think it gives a better door seal without adjustments in the future. As I'm not a mechanic, I can't guide you but others who frequent this site are so hopefully they will post.
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Re: piano hinge

Postby Fred Whitacre » Wed May 01, 2013 7:22 pm

Thanks Pat,

I'll try that website.

Fred
Fred Whitacre
ICS member
ICS member
 
Posts: 3
Joined: Tue Feb 02, 2010 3:02 am

Re: piano hinge

Postby N3322G » Wed May 01, 2013 8:01 pm

Fred,

The website is this one - just a different section - from the Home Page click Tech Tab and go from there. I just gave you the hotlink to make it easy.
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Re: piano hinge

Postby Ray B » Thu May 02, 2013 6:09 am

Fred, If your log book does not show who installed the hinge you might try calling Webco as they may have sold the parts for the installation and can give some guidance. I to thought about this option when my top hinge was cracked and the only new one to be found anywhere at the time was 200 dollars! Ray B
Ray B
ICS member
ICS member
 
Posts: 144
Joined: Wed Dec 23, 2009 6:02 am

Re: piano hinge

Postby Fred Whitacre » Thu May 02, 2013 2:05 pm

Thanks for the help.
The first thing I will do
is dig thru the last 50
years of the logbook, it very
well could be in there. My
mechanic gave me the impression
that the hinge was not faa
approved.
Fred Whitacre
ICS member
ICS member
 
Posts: 3
Joined: Tue Feb 02, 2010 3:02 am

Re: piano hinge

Postby Dave Fitzgerald » Thu May 02, 2013 6:12 pm

Dave Fitzgerald
User avatar
Dave Fitzgerald
Site Admin
 
Posts: 95
Joined: Sat Jun 21, 2003 3:49 am
Location: Canton, Ohio

Re: piano hinge

Postby N3322G » Thu May 02, 2013 7:17 pm

Dave,

Funny your should mention 7171P - that is where I saw it - didn't know Lucky had gotten that done. The aircraft raced in the events I ran a couple of times and then it was sold to another party.
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Re: piano hinge

Postby Charles Schefer » Thu May 02, 2013 8:03 pm

You might do some digging into AC 43.13-1B. It deals with acceptable repair methods and "substitution of parts". The FAA recently pointed me in this direction related to replacing all of the nose cowl fasteners on my PA-30 with nut plates and screws. The AC is a long and comprehensive document but it may help in this context. You can download it from the FAA website.

- Charles
User avatar
Charles Schefer
 
Posts: 563
Joined: Mon Mar 12, 2012 7:09 pm


Return to Maintenance - Airframe

Who is online

Users browsing this forum: No registered users and 42 guests