Australian Stabilator Horn

Australian Stabilator Horn

Postby Charles Peterson » Wed Feb 13, 2013 7:09 am

Does anyone know the latest regarding the Australian Stabilator Horn or another replacement. Is is going to be available?

Charles
Charles Peterson
ICS member
ICS member
 
Posts: 5
Joined: Fri Feb 04, 2005 4:17 am
Location: Fullerton, CA

Re: Australian Stabilator Horn

Postby Michael Rath » Sun Feb 17, 2013 5:00 pm

I would like to know the same thing. I am hoping it will be an approved STC by the time my 100 hours is up.
Michael Rath
 
Posts: 72
Joined: Wed Nov 23, 2011 3:10 am

Re: Australian Stabilator Horn

Postby Lindsay P Wurlitzer » Sun Feb 24, 2013 1:25 am

My annual will start at the end of March or early April and I too would like to know if the Australian Horn can be replacement and NOT subject to the AD. How about the argument that the Australian Horn is a different part number and therefore it is not subject to the AD?
Lindsay P Wurlitzer
 
Posts: 1
Joined: Sun Feb 24, 2013 1:19 am

Re: Australian Stabilator Horn

Postby Michael Rath » Sun Feb 24, 2013 1:39 am

Can anyone post an email or give a contact name of who would have any info on the status of the Australian horn? As important as this is to our aircraft you would think this is something we would keep up with?
Last edited by Michael Rath on Sun Feb 24, 2013 1:52 am, edited 1 time in total.
Michael Rath
 
Posts: 72
Joined: Wed Nov 23, 2011 3:10 am

Re: Australian Stabilator Horn

Postby Tom Veatch » Sun Feb 24, 2013 1:44 am

Tom Veatch
 
Posts: 28
Joined: Wed Sep 28, 2011 7:50 am
Location: Wichita, Kansas

Re: Australian Stabilator Horn

Postby Zach Grant L1011jock » Sun Feb 24, 2013 1:58 pm

We do keep up with this. It is and has been in the hands of the FAA ATL ACO, the same folks that brought you the AD in the first place. When there is something to report, we will. Until then there is simply no news.
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Re: Australian Stabilator Horn

Postby Michael Rath » Sun Feb 24, 2013 3:43 pm

Thanks Zach.
Michael Rath
 
Posts: 72
Joined: Wed Nov 23, 2011 3:10 am

Re: Australian Stabilator Horn

Postby PhilH » Thu Apr 11, 2013 7:13 pm

I recently e-mailed the FAA's Keith Noles (contact for the AD) and asked about status on the STC for Australian horn since my annual will be in September and would like to know if this is an option. This is his response:

I'm still working back and forth with the Australians on this project. We're making good progress. The STC holder stays rather busy and can go long periods before I hear back.

I'd like to think we'll have a final decision within the next few months. I cannot guarantee anything, but suspect it should be in plenty of time for you to make an informed decision ahead of your annual.

I plan to communicate the outcome through the Comanche Society, so keep your eyes and ears open there.

Thank you.

G. "Keith" Noles
PhilH
ICS member
ICS member
 
Posts: 6
Joined: Wed Jun 22, 2005 1:26 pm

Re: Australian Stabilator Horn

Postby Edward Pencosky » Sat Apr 27, 2013 3:31 am

If it takes me 2 years to fly the 100 hrs mentioned the horn Ad can I fly untill I have put 100 hrs on the plane since the horn Ad came out......or do I have to do the Ad at the next anual ?. The way I understand it I have 100 hrs of flight time from the day the Ad came out ? Am I right on this
Edward Pencosky
 
Posts: 44
Joined: Wed Feb 08, 2012 9:17 pm

Re: Australian Stabilator Horn

Postby Zach Grant L1011jock » Sat Apr 27, 2013 9:18 pm

Yes.
-Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Re: Australian Stabilator Horn

Postby Edward Pencosky » Sun Apr 28, 2013 12:14 am

Thanks zach
Edward Pencosky
 
Posts: 44
Joined: Wed Feb 08, 2012 9:17 pm

Re: Australian Stabilator Horn

Postby Grant Harrison » Mon Jun 03, 2013 6:56 am

A quick pic to show the Australian part compared to the Piper one!
I have installed 2 of these so far and it really is not that difficult.
Hope you can get the STC through soon as is is a much stronger looking part?
By the way the original part was changed as a precaution,
Upon dis-assembly it was cracked in 2 places inside that were not visible from the outside!
Attachments
P2280002.JPG
Old and new
Last edited by Grant Harrison on Tue Jun 04, 2013 4:20 am, edited 1 time in total.
Grant Harrison
 
Posts: 1
Joined: Tue Apr 10, 2012 4:41 am

Re: Australian Stabilator Horn

Postby N3322G » Mon Jun 03, 2013 9:25 am

Grant - thanks for the great photo comparison
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Re: Australian Stabilator Horn

Postby PhilH » Mon Jun 17, 2013 3:47 pm

Three questions about the Australian Horn - assuming it is ultimately STCed:
1) can anyone with horn AD experience provide pros and cons for the Australian horn?
2) is the any up to date information including lead time (I have the 1-2011 order form) on purchasing the horn either individually or as a group?
3) is anyone willing to loan or share the "installation kit"?
Any other thoughts are appreciated.
PhilH
ICS member
ICS member
 
Posts: 6
Joined: Wed Jun 22, 2005 1:26 pm


Return to Maintenance - Airframe

Who is online

Users browsing this forum: No registered users and 14 guests