Battery Replacement for PA 24-250

Battery Replacement for PA 24-250

Postby Randy Johnson » Thu Feb 07, 2013 3:18 pm

Concord or Gill or another brand? I think the OEM replacement is a Gill 35. Does that sound right? Any thoughts are appreciated. Im in Florida so cold is not nearly an issue as heat (fluid evaporation)...

Looks like the Gill currently installed lasted 3 years.
User avatar
Randy Johnson
 
Posts: 176
Joined: Thu Apr 14, 2011 1:57 am
Location: Boston Area (BEV)

Re: Battery Replacement for PA 24-250

Postby 9089P » Thu Feb 07, 2013 3:46 pm

Personally I would only buy a gel type ie Concord battery. It solves the boil over problem. Mine have lasted twice as long as the wet batteries because they can't be boiled over. No more acid, no more acid damage, and no more acid clean up.

Good luck, Don
9089P
ICS member
ICS member
 
Posts: 426
Joined: Wed Jan 07, 2004 7:01 am

Re: Battery Replacement for PA 24-250

Postby N3322G » Thu Feb 07, 2013 3:54 pm

Our concord batterers have been getting a solid 4 years and then we replace them just because. We do fly most every week though in TX.
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Re: Battery Replacement for PA 24-250

Postby Randy Johnson » Fri Feb 08, 2013 2:12 am

Great advice. Thanks to you both.
User avatar
Randy Johnson
 
Posts: 176
Joined: Thu Apr 14, 2011 1:57 am
Location: Boston Area (BEV)

Re: Battery Replacement for PA 24-250

Postby Randy Johnson » Fri Feb 08, 2013 2:14 am

Great advice. Thanks to you both.
User avatar
Randy Johnson
 
Posts: 176
Joined: Thu Apr 14, 2011 1:57 am
Location: Boston Area (BEV)

Re: Battery Replacement for PA 24-250

Postby Joseph Munoz » Sun Feb 10, 2013 8:42 pm

I recently installed a Gill G35-S. Its a sealed battery and you dont have to worry about acid spill either. I installed the Battery Minder designed for the Gill batteries and so far no problems with either item
Joseph Munoz
 
Posts: 38
Joined: Fri Jun 15, 2012 4:57 am

Re: Battery Replacement for PA 24-250

Postby Randy Johnson » Tue Feb 12, 2013 5:34 pm

I wonder if my Gill needs to be replaced yet. After completely charging the battery its resting voltage is 12.6

Is it time yet?
User avatar
Randy Johnson
 
Posts: 176
Joined: Thu Apr 14, 2011 1:57 am
Location: Boston Area (BEV)

Re: Battery Replacement for PA 24-250

Postby 9089P » Tue Feb 12, 2013 10:48 pm

Well, 12.6 is pretty normal voltage for the battery just sitting there. But it could be a surface charge. Best to have it load tested (O'Reillys) to be sure.

Don
9089P
ICS member
ICS member
 
Posts: 426
Joined: Wed Jan 07, 2004 7:01 am

Re: Battery Replacement for PA 24-250

Postby Randy Johnson » Thu Feb 14, 2013 11:02 pm

Will do. Thanks!
User avatar
Randy Johnson
 
Posts: 176
Joined: Thu Apr 14, 2011 1:57 am
Location: Boston Area (BEV)

Re: Battery Replacement for PA 24-250

Postby Andreas Riedel » Mon Feb 25, 2013 5:11 pm

Had problems with Gill batteries and changed to Concord. No problems anymore. Never looked back.
Andreas
Andreas Riedel
ICS member
ICS member
 
Posts: 63
Joined: Thu Nov 27, 2008 1:03 pm

Re: Battery Replacement for PA 24-250

Postby Randy Johnson » Tue Feb 26, 2013 10:59 pm

Thanks Andreas. Sounds like good advice. Very little difference in price between the two brands (sealed versions)...so I think I will try a Concord to see if I can get an extra annual or two out if it.

I must say my Gill has lasted two and a half years and it just had to be recharged after a two month no fly period. It charged right up and is still working fine after two flights. 12.6 volts after load.

Thanks to all for the great discussion and advice.
User avatar
Randy Johnson
 
Posts: 176
Joined: Thu Apr 14, 2011 1:57 am
Location: Boston Area (BEV)

Re: Battery Replacement for PA 24-250

Postby JIMICS2452 » Wed Feb 27, 2013 1:38 pm

With the Concord check the charging voltage that the battery gets. Be sure the regulator is in the range that Concord spec for the temperatures. In South FL I set mine to 13.8V because of the heat. Results 6+ years on 2 batteries. In colder climes the voltage will be higher. Concord's tech support can help with a recommendation.

Jim Hiatt
Jim Hiatt
User avatar
JIMICS2452
ICS member
ICS member
 
Posts: 254
Joined: Sat Mar 09, 2002 9:26 pm
Location: Pine Shadows Airpark - North Fort Myers, FL

Re: Battery Replacement for PA 24-250

Postby Randy Johnson » Tue Mar 26, 2013 4:49 pm

Interesting. Thanks Jim.
User avatar
Randy Johnson
 
Posts: 176
Joined: Thu Apr 14, 2011 1:57 am
Location: Boston Area (BEV)

Re: Battery Replacement for PA 24-250

Postby Ron Davis » Sun Apr 07, 2013 12:04 am

Just replaced my 5 year old Concord just because. No acid damage to airplane and PMA Spruce delivered to Fl $237.
Ron Davis
ICS member
ICS member
 
Posts: 11
Joined: Tue May 26, 2009 2:19 pm

Re: Battery Replacement for PA 24-250

Postby Randy Johnson » Mon Aug 05, 2013 3:48 pm

Finally replaced with the concord...huge difference in start up. Also used the new tempest plugs. Cant believe the difference.

Does the old battery core have any value?
User avatar
Randy Johnson
 
Posts: 176
Joined: Thu Apr 14, 2011 1:57 am
Location: Boston Area (BEV)

Next

Return to Maintenance - General

Who is online

Users browsing this forum: No registered users and 0 guests

cron