Lord Engine Shock Mounts: Top and Lower ?

Lord Engine Shock Mounts: Top and Lower ?

Postby Paul Michel Fenouil » Tue Jan 15, 2013 11:42 am

Hello,
I bought 4 engine mounts J7402-5 for a PA24-180 SIngle Comanche. The Piper PA24 Service Manual indicates: Top shocks: gold colored shock is aft and silver shock is forward. Lower shock are installed opposite.
My problem is: ALL LORD SHOCKS ARE GOLD COLORED, NO ONE IS SILVER. Is there anybody to explain how could I recognize Gold Shock of the Silver in order to mount properly top and lower?
Thanks for your attention

Michel
(From West Africa)
User avatar
Paul Michel Fenouil
 
Posts: 39
Joined: Fri Oct 28, 2011 12:16 pm

Re: Lord Engine Shock Mounts: Top and Lower ?

Postby DAVEG24 » Tue Jan 15, 2013 2:35 pm

Michel,

In simple terms, forget about it. It doesn't matter. I had the same concerns a year ago when I changed mine. Apparently they no longer color code the mounts, and the folks at Lord that I talked to told me not to be concerned. I'll take their word for it. I've not had any problems since I installed the new mounts.

Dave Gitelman
DAVEG24
ICS member
ICS member
 
Posts: 754
Joined: Mon Feb 21, 2000 4:07 pm

Re: Lord Engine Shock Mounts: Top and Lower ?

Postby Paul Michel Fenouil » Wed Jan 16, 2013 10:50 am

Thank you very much Dave. I guess shock mounts technologies have been improved so installation of top shocks and lower shocks is now the same.

Michel
User avatar
Paul Michel Fenouil
 
Posts: 39
Joined: Fri Oct 28, 2011 12:16 pm

Re: Lord Engine Shock Mounts: Top and Lower ?

Postby Duane Bolin » Wed Jan 16, 2013 5:50 pm

Hi Paul and Michel

I had a nearly identical question that I posted on 12 March 2012 under powerplant. I read the same thing as you and was confused because the lord mounts for my 180 were all the same gold color.
Zach answered my question as follows, "The color code is for the 250 only. The 180 doesnt have a "soft side"!"
Hope this helps.
Duane
User avatar
Duane Bolin
ICS member
ICS member
 
Posts: 30
Joined: Sat Oct 25, 2008 4:45 pm


Return to Maintenance - General

Who is online

Users browsing this forum: No registered users and 26 guests

cron