Whelen Beacon

Re: Whelen Beacon

Postby Patrick Reilly » Tue Dec 11, 2012 11:24 pm

Hi Kristin,

Quick question, Ive got a 1965 260 with the mechanical rotating becon above the baggage bay. The part number 010770900-4 I dont see on the Whelen list nor does it pull up anything on aircraftspruce.

On the Whelen parts list I'm trying to track down the part there but can't find it on the list. That part number you provided 010770900-4,what series of led is that on the list? Im assuming its the all red one, maybe the 90520 series or the white/red HRFA series. Not going to lie Im not feeling the white/red combo at first look but if its brighter/better then it may grow on me.

Thanks for your help, unable to call from overseas and trying to order online so I can have it ready for when I get back to the states.

Thanks,
Pat
Patrick Reilly
 
Posts: 16
Joined: Wed Jan 11, 2012 2:28 am

Re: Whelen Beacon

Postby Matt Bogard » Wed Dec 12, 2012 9:07 pm

Pat,

Call Whelen - they are very knowledgeable on the phone. I'm 99" sure you have the 3.7" base with three screws for mounting - they can give you the right part number in no time based on whether you want Red/Red or Red/White. I went with Red/Red and it's very, very bright.
User avatar
Matt Bogard
 
Posts: 110
Joined: Fri Jun 17, 2011 1:47 pm
Location: Omaha, NE

Re: Whelen Beacon

Postby Kristin Winter » Fri Dec 14, 2012 5:14 am

Pat,

I second Matt's suggestion. Whelen must know their part numbers. I have a 2009 catalog which shows my beacon by the part number I gave you. It looks like they may either be phasing that one our, or have combined it as a part of another product line and changed the numbers. I can't make heads or tails of it either, though I bought one about a year ago so they were still available then.
Kristin
User avatar
Kristin Winter
ICS member
ICS member
 
Posts: 1299
Joined: Tue Aug 09, 2005 5:21 pm
Location: Northern California

Re: Whelen Beacon

Postby Alan Cheak » Wed Dec 19, 2012 3:03 pm

As my airplane goes into annual next month I just discovered that once again my rotating beacon bulb has burnt out. Guess I'll replace it with a strobe. Took these photos of some airplanes last year at the ICS convention in Savanna.

Alan
ICS Savanna 2011 017.jpg
ICS Savanna 2011 017.jpg
Attachments
ICS Savanna 2011 020.jpg
Last edited by Alan Cheak on Tue Jan 08, 2013 2:20 am, edited 1 time in total.
A good loser... is still a loser.
User avatar
Alan Cheak
ICS member
ICS member
 
Posts: 142
Joined: Sun Jan 12, 2003 8:17 pm
Location: Peachtree City, GA KFFC

Re: Whelen Beacon

Postby Patrick Reilly » Thu Jan 03, 2013 11:59 pm

Finally got settled in back home and got a chance to track down this infamous whelen led beacon.

Talking to Whelen, the previous part number discussed earlier 01-0770900-04 has been superseded by 01-0771080-55. Unfortionately for me I'm unable to track one down. Aircraft spruce right by me in Corona said it looks like a 8 week lead time and they'll get back to me with pricing. Whelen stated it is retail priced at $795 but expect.

To find it for ~600's. (UPDATE: $665 from Aircraft Spruce)

I hope this helps anyone else trying to change out their beacon with the latest part number. Unfortionately my mechanical beacon lights but will no longer rotate the glass plates.

Thanks for everyone's help!

Pat
Last edited by Patrick Reilly on Fri Jan 04, 2013 6:00 am, edited 1 time in total.
Patrick Reilly
 
Posts: 16
Joined: Wed Jan 11, 2012 2:28 am

Re: Whelen Beacon

Postby Kristofer Duckett » Fri Jan 04, 2013 4:46 am

Thank you for that info Pat. I'm am in the market for the beacon as well as mine is seriously grinding! I'm about to get an annual done so hopefully I can work it out.

Kris
Kristofer Duckett
ICS member
ICS member
 
Posts: 98
Joined: Thu Aug 05, 2010 6:52 am

Re: Whelen Beacon

Postby 9089P » Fri Jan 04, 2013 4:46 pm

Hi Kris,

Have you tried Chief in Oregon? I believe that is where I bought mine.

Good Luck, Don
9089P
ICS member
ICS member
 
Posts: 426
Joined: Wed Jan 07, 2004 7:01 am

Re: Whelen Beacon

Postby Patrick Reilly » Fri Jan 04, 2013 7:09 pm

Hello Kris,

Just to give you a heads up on Chief, they've informed me yesterday it'd be 4-6 weeks lea time and the price is $695. Seems like these things are selling like hot cakes or they only make them after ones been ordered.

Best Regards,
Pat Reilly
Patrick Reilly
 
Posts: 16
Joined: Wed Jan 11, 2012 2:28 am

Re: Whelen Beacon

Postby Alan Cheak » Mon Jan 07, 2013 7:48 pm

Emailed Whelen this morning and confirmed that the red LED to replace the rotating beacon on the fuselage is part number 01-0771080-55 for a 12 volt system. You'll also need the mounting ring model A440. Just put one one backorder from Aircraft Spruce here in Peachtree City. Total cost, $679.20. Hope I don't have to wait too long for it to arrive.

Alan
Last edited by Alan Cheak on Tue Jan 08, 2013 2:21 am, edited 1 time in total.
A good loser... is still a loser.
User avatar
Alan Cheak
ICS member
ICS member
 
Posts: 142
Joined: Sun Jan 12, 2003 8:17 pm
Location: Peachtree City, GA KFFC

Re: Whelen Beacon

Postby 9089P » Mon Jan 07, 2013 9:34 pm

Hi Alan,

The mounting ring you referenced, is that a separate part to be ordered? When I did my install, it mounted fine but I felt it allowed for the possibility of allowing water to get in to the fuselage. I sealed it with silicone but I'm wondering if the ring(the mounting ring model A440) you mention is to solve the water issue.

Thanks, Don
9089P
ICS member
ICS member
 
Posts: 426
Joined: Wed Jan 07, 2004 7:01 am

Re: Whelen Beacon

Postby N3322G » Mon Jan 07, 2013 11:44 pm

To all,

Whelen did re-design and 'improve' their beacon. The improved beacon was not a good fit for the housing on my twin because the screw holes had it sit too low in the housing. Yes, I got to install it twice and there is a longer story but for now ...

Whelen LED Model 709004 or Part Number 01-0770900-04 is a 100% 'red' LED beacon and fits in the Piper housing as delivered on PA39s the same way the old rotating beacon did. While this is not on the website or in the current catalog, Whelen tells me it is still available.

The 'newer' model is smaller and allowed a moat of water to sit around the beacon. When I shared this problem with Whelen two years ago, they said I was the first person to complain about this. Here is a photo comparison. Double click on the photos to make them larger and clearer.
Attachments
IMG_4913.JPG
Original beacon next to 01-0770900-04 Notice the hole are at the same level as the holes from the old beacon
IMG_3280.JPG
This photo shows the new design whelen - notice the distance from the top curve of the housing to the screw holes. This is the one that provided a moat of water to sit on the top of the tail and it is why I got the older model that fit correctly - like Kirstin's does.
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Re: Whelen Beacon

Postby Alan Cheak » Tue Jan 08, 2013 2:26 am

Don:

Yes the mounting ring ( A440 ) is seperate. Cost is 20 bucks.

Alan
A good loser... is still a loser.
User avatar
Alan Cheak
ICS member
ICS member
 
Posts: 142
Joined: Sun Jan 12, 2003 8:17 pm
Location: Peachtree City, GA KFFC

Re: Whelen Beacon

Postby MULEFLY » Thu Jan 10, 2013 2:28 pm

Pat -- I'd bet that beacon slows you 5 kts! :-)

Jim
MULEFLY
ICS member
ICS member
 
Posts: 900
Joined: Tue Jan 25, 2000 1:34 am
Location: Wisconsin

Re: Whelen Beacon

Postby Zach Grant L1011jock » Thu Jan 10, 2013 3:55 pm

Just means they can see the beacon longer as she goes by...
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Re: Whelen Beacon

Postby N3322G » Thu Jan 10, 2013 5:09 pm

Jim and Zach - you guys are too funny - thanks for the laughs. Hope to see you both at Clifton in April. should be fun and always a learning experience.
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

PreviousNext

Return to Maintenance - General

Who is online

Users browsing this forum: No registered users and 29 guests

cron