PA30 Cowl Flap Spring

PA30 Cowl Flap Spring

Postby Douglas Dodson » Sat Nov 03, 2012 9:56 pm

My recently acquired PA30 is missing both cowl flap assist springs. Does anyone have a source to buy these or can anyone tell me the length and approximate spring rate?
Douglas Dodson
 
Posts: 7
Joined: Tue Dec 27, 2011 9:59 pm

Re: PA30 Cowl Flap Spring

Postby N3322G » Sat Nov 03, 2012 10:52 pm

I checked the parts catalog on this website http://www.comancheflyer.com/NS/manuals ... atalog.pdf I searched on cowl flap spring and it took me directly to this parts list in section V for power plant for control quadrant etc. Not where I would have put it so thank goodness ICS made this searchable.
Found Fig 37 item #77 appears to be the cowl flap spring. It shows a couple of part #s. Google gave some hits but I usually call Comanche Gear first and Webco second.

Hope this helps. If you need a photo where this attaches, let me know. Just took some for another twin owner. We went through this at the last annual and it took about 6-8 iterations to make it work well.
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Re: PA30 Cowl Flap Spring

Postby MULEFLY » Sun Nov 04, 2012 12:28 am

Our friends at Webco have them... (at least they used to).

Jim
MULEFLY
ICS member
ICS member
 
Posts: 900
Joined: Tue Jan 25, 2000 1:34 am
Location: Wisconsin

Re: PA30 Cowl Flap Spring

Postby Douglas Dodson » Sun Nov 11, 2012 7:27 pm

I got them from KRN after a bit of a search. Turns out, these were added after my s/n, but I am thinking about modifying my aircraft to use them. It would be better for the cable.
Douglas Dodson
 
Posts: 7
Joined: Tue Dec 27, 2011 9:59 pm


Return to Maintenance - Airframe

Who is online

Users browsing this forum: No registered users and 5 guests