 |
International Comanche Society A maintenance forum for ICS members to share knowledge and learn about their Comanche. Problems? - Contact Administrator at: Webmaster |
Squaky Engine Fuel Primer
4 posts
• Page 1 of 1
Squaky Engine Fuel Primer
by Joseph Munoz » Thu Sep 13, 2012 6:30 pm
On my 1959 Comanche 250 when I prime the engine, the primer squeaks pretty loudly. Anyone else ever get that? It works fine and there are no leaks, just an annoying squeak. After reading the maintenance manual, there is nothing mentioned. Anyone have any solution? Are you allowed to put some type of oil or lubricant on the shaft when you pull it out?
- Joseph Munoz
- Posts: 38
- Joined: Fri Jun 15, 2012 4:57 am
Re: Squaky Engine Fuel Primer
by Pat Donovan » Thu Sep 13, 2012 8:22 pm
I would use a drop of LPS-1 to help lubricate the shaft. The next step might be a smidgen of "fuel lube" - the same stuff used on the fuel selector.
PatD
PatD
-
Pat Donovan - ICS Treasurer
- Posts: 93
- Joined: Sun Jul 11, 2004 3:32 pm
- Location: Troy, MO
Re: Squaky Engine Fuel Primer
by Andrew Foster » Fri Sep 14, 2012 3:02 pm
Had the same issue on our 250. Lubed the shaft with LPS, Like brand new now
- Andrew Foster
- ICS member
- Posts: 161
- Joined: Fri Dec 31, 2004 9:22 pm
Re: Squaky Engine Fuel Primer
by Joseph Munoz » Sat Sep 15, 2012 3:12 pm
Thnaks guys. I just ordered some LPS
- Joseph Munoz
- Posts: 38
- Joined: Fri Jun 15, 2012 4:57 am
4 posts
• Page 1 of 1
Return to Maintenance - General
Who is online
Users browsing this forum: No registered users and 41 guests