Carpet

[aerofarm]

Where is a good place to get new pre-cut carpet for my 260B

Nate

[jeffrey aryan]

I have heard Airtex is good and has patterens.

[JIMICS2452]

Airtex does not cut out slots for the seat tracks. I used a good local auto upholstery shop.

Jim Hiatt

[Jay]

Usually you can fin someone local that does planes and boats in addition to cars. I'd ask at local FBO's.

Jay

[MULEFLY]

You can buy the Airtex and then install it... trim around the seat rails... take it to an upholstery shop and have the edges stitched.

[Randy Johnson]

Bought airtex and am very pleased with results. Didn't do cut out after much investigation. Be ready to do more work when you pull seats out. If you pull a floor panel you may find 50 years worth of dirt and grime, decayed insulation and, in my case..an old rat trap. Fortunately it was empty.

[Jerry Mazza]

Airtex was good for me. The hard part was geeting the old carpet out, removing all the seat rails,old glue, grime, debris etc.

[aerofarm]

Doesn't your carpet come out at every annual? My mechanic always makes me take it out to inspect gear, fuel pump, flaps, etc.

[JIMICS2452]

My carpet is out every year. I want to look under the floorboards! After finding cracks it the bulkheads under the seat rails in multiple Comanches the floorboards will probably start coming out too!