Good Comanche A&P in Michigan area

Good Comanche A&P in Michigan area

Postby Joey » Sun Jul 01, 2012 3:33 pm

Does anyone know of a good Comanche A&P in the Michigan area?
Joey
ICS member
ICS member
 
Posts: 4
Joined: Tue Feb 01, 2005 3:45 pm

Re: Good Comanche A&P in Michigan area

Postby aiu0462 » Sun Jul 01, 2012 5:15 pm

Try Dan Williams in Lowell, MI, just NE of Grand Rapids. He maintains my 260 while I am here for the Summer and has a couple others he maintains. The airport is 24C. Forgot to give you the phone number. His Cell phone is, 6168560836
Last edited by aiu0462 on Sun Jul 01, 2012 5:17 pm, edited 1 time in total.
aiu0462
ICS member
ICS member
 
Posts: 44
Joined: Sun May 04, 2008 1:21 am

Re: Good Comanche A&P in Michigan area

Postby N3322G » Sun Jul 01, 2012 5:15 pm

Heritage in Rockford IL if that isn't too far
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Re: Good Comanche A&P in Michigan area

Postby Joey » Sun Jul 01, 2012 5:24 pm

Thanks for the replies. I certainly am willing to go outside MI if that's where I can find someone who knows Comanche's.
Joey
ICS member
ICS member
 
Posts: 4
Joined: Tue Feb 01, 2005 3:45 pm

Re: Good Comanche A&P in Michigan area

Postby N3322G » Sun Jul 01, 2012 6:47 pm

Cliff at Heritage is a Tech Director for ICS and maintains several Comanches.
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Re: Good Comanche A&P in Michigan area

Postby MULEFLY » Sun Jul 01, 2012 10:21 pm

Cliff (Heritage Aero) maintains at least a couple of dozen Comanches... probably more than 30.
MULEFLY
ICS member
ICS member
 
Posts: 900
Joined: Tue Jan 25, 2000 1:34 am
Location: Wisconsin

Re: Good Comanche A&P in Michigan area

Postby David Pyle » Mon Jul 02, 2012 2:48 pm

If near Traverse City check Cherry Capital at the main airport. Bought my last Comanche there. Since then they have done several prebuys I followed. Very thorough. Maybe too thorough.
713 464 6717
dap8@comcast.net
David Pyle
ICS member
ICS member
 
Posts: 372
Joined: Sat Nov 01, 2003 10:33 pm
Location: Houston

Re: Good Comanche A&P in Michigan area

Postby Joey » Tue Jul 03, 2012 7:56 pm

Again, thanks all. I am only about 90 mi. north of TVC, Dave. Am trying to get something set up for the time in the near future when I think my current A&P, who has done every annual since the plane was bought in 1965, will be retiring. He is located in downstate MI and does just about nothing but Comanches, but I'm willing to go almost anywhere if I can find someone who really knows Comanches. From what I've read here, Heritage Aero in Rockford sounds like a pretty good bet.

Joey
Joey
ICS member
ICS member
 
Posts: 4
Joined: Tue Feb 01, 2005 3:45 pm

Re: Good Comanche A&P in Michigan area

Postby N3322G » Tue Jul 03, 2012 9:06 pm

Wow Joey - that knowledge of your Comanche will be hard to duplicate.

When I had to change mechanics - also due to retirement, I 'tried' a couple out by doing an oil change with them and hanging around while they did the work. Two professed knowledge but did not exhibit it ie they didn't know what oil filter to use and didn't know the 50 hours ADs. The third one did. Of course, this was before this Forum existed so references were much harder to come by.

Since I live so far south, I haven't used Cliff but will be interested in your experience. I've heard such great things about him - met him at convention and was impressed.
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Re: Good Comanche A&P in Michigan area

Postby N8349P » Wed Jul 04, 2012 2:03 pm

I hope your A&P is not "Putt". He maintains my bird and I know his retirement is not too far in the future.
Doug Pickett
586-264-0786
N8349P
ICS member
ICS member
 
Posts: 35
Joined: Sun Nov 16, 2003 5:39 pm
Location: Sterling Heights, MI

Re: Good Comanche A&P in Michigan area

Postby Joey » Mon Sep 10, 2012 9:54 pm

Yes, Doug - my mechanic is Putt!
Joey
ICS member
ICS member
 
Posts: 4
Joined: Tue Feb 01, 2005 3:45 pm


Return to Maintenance - General

Who is online

Users browsing this forum: No registered users and 47 guests

cron