Prop Alcohol

Prop Alcohol

Postby Edward Rognerud » Tue Feb 07, 2012 8:03 pm

Hello,

Does anybody have a good source for prop alcohol? I believe it is a 99% isopropyl alcohol product. I am in the Minneapolis/St. Paul area in Minnesota, and it seems to be a difficult find. I did find that Signature does have some for $60 per gallon. None of the other operations even stock it, which seems a little strange regarding Minnesota's extensive exposure to icing conditions. I also found it online and was quoted $95 per gallon plus a $50 hazmat fee on top of shipping. I am hoping to find something a little more reasonable.

Thank you,

Ed Rognerud
Rosemount, MN
User avatar
Edward Rognerud
 
Posts: 21
Joined: Fri Nov 11, 2011 3:57 am
Location: Rosemount, MN KSGS

Re: Prop Alcohol

Postby Kristin Winter » Tue Feb 07, 2012 10:13 pm

When I have bought it, I have paid about $100 for a 5 gallon pail. I would check local industrial supply places. Many moons ago, I flew out of KSTP and we bought it be the 55 gallon drum.

If you were closer to Northern California, I could get you some waste isopropyl for nothing. It is clear with no particulates. I is just used to rinse electronic components so they only use it once as the purity required there is much more than necessary for dumping it on your props.
Kristin
User avatar
Kristin Winter
ICS member
ICS member
 
Posts: 1299
Joined: Tue Aug 09, 2005 5:21 pm
Location: Northern California

Re: Prop Alcohol

Postby Hansmeister » Wed Feb 08, 2012 12:50 am

Has anyone worked out the cost for cheap booze per gallon? Moonshine, maybe.
User avatar
Hansmeister
ICS member
ICS member
 
Posts: 802
Joined: Thu Jun 27, 2002 5:44 pm
Location: Kah-li-forn-yah

Re: Prop Alcohol

Postby Jerry Mazza » Sun Feb 19, 2012 11:45 pm

I have several gallons from when I had a deiced Twinco. I would sell it for $35agallon plus shipping
Jerry Mazza
ICS member
ICS member
 
Posts: 39
Joined: Wed Oct 27, 2010 6:03 pm

Re: Prop Alcohol

Postby David Callon » Thu Mar 01, 2012 4:22 am

I am not saying that I use it but at some paint stores they can order 99%
The cost is about 60.00 for 5 gallons
David Callon
ICS member
ICS member
 
Posts: 38
Joined: Tue Apr 19, 2005 10:53 pm

Re: Prop Alcohol

Postby Alan South » Thu Mar 01, 2012 4:38 pm

The product specified in my POH is Aeroshell compound 06A. Datasheet is at:

The relevant US standard is: TT-I-735a Grade B which is for 99.6%+ Isopropyl alcohol. You tend to find either 99% or 99.9% IPA on sale. Given the likelihood of a bit of condensation in the tank, I'm not sure whether it matters which one. I find eBay has plenty of sellers here in the UK

As a minor cultural reference, if you go into a British pub and ask for a pint of IPA, you will get a glass of India Pale Ale.

Alan
Alan South
ICS member
ICS member
 
Posts: 18
Joined: Sat Jan 17, 2009 10:34 am

Re: Prop Alcohol

Postby 9089P » Thu Mar 01, 2012 10:01 pm

If you order an IPA here you would get the same, India Pale Ale is the in beer right now among the microbrewers.

Don
9089P
ICS member
ICS member
 
Posts: 426
Joined: Wed Jan 07, 2004 7:01 am

Re: Prop Alcohol

Postby Jay » Sat Mar 03, 2012 5:23 pm

I have some Thunderhead IPA in the fridge right now, but it's way too good to squirt on props! :D

Jay
Jay
PA 30 N7702Y
User avatar
Jay
ICS member
ICS member
 
Posts: 473
Joined: Tue Sep 30, 2003 10:59 pm
Location: Portland, Oregon


Return to Maintenance - General

Who is online

Users browsing this forum: No registered users and 48 guests

cron