Gust Lock?

Gust Lock?

Postby Patrick Reilly » Mon Feb 20, 2012 8:17 am

Any tips or products you suggest to keep the controls from moving around when tied down? I have been using the ole seatbelt through the control but wonder if theres something better to use?
Patrick Reilly
 
Posts: 16
Joined: Wed Jan 11, 2012 2:28 am

Re: Gust Lock?

Postby N3322G » Mon Feb 20, 2012 1:42 pm

Patrick,

Many folks have more sophisticated gust locks but we still use the seat belt method. So far, 42 years, so good, during travels. At home in the hangar we don't tie them but do chock it.
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Re: Gust Lock?

Postby David Pyle » Mon Feb 20, 2012 4:49 pm

Most pilots I know use a bungee cord to secure the yokes. That holds the ailerons, but not the elevators. (Probably not needed for them anyway.) There is hanger talk that securing with the seat belt has a deleterious long term effect on the controls. I have a sophisticated, adjustable floor to yoke control device I inherited and never used that you can have for the shipping and handling cost which I guess might be $20. There is no warranty implied or given. Dave Pyle dap8@comcast.net
713 464 6717
dap8@comcast.net
David Pyle
ICS member
ICS member
 
Posts: 372
Joined: Sat Nov 01, 2003 10:33 pm
Location: Houston

Re: Gust Lock?

Postby N3322G » Mon Feb 20, 2012 5:30 pm

I should mention we alternate which way we turn the yoke. Impact on rigging has not been noticed. Periodic re-rigging is done at annual - every 5- 10 years.
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Re: Gust Lock?

Postby Zach Grant L1011jock » Mon Feb 20, 2012 5:43 pm

I use two bungee cords. The first runs around both yokes, and the second runs around the first bungee and down to the hand brake lever. All i care about is that the controls dont bang. A little movement is not a bad thing as long as it is dampened.

Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Re: Gust Lock?

Postby MULEFLY » Mon Feb 20, 2012 6:16 pm

When I purchased the twin it had a Ashby gust lock that is very "over engineered" but works really well. Ashby has since sold the glareshield to Aircraft Spruce so I don't know if the gust lock device is still available... but if you find a used one, it is a nice device.
Jim
MULEFLY
ICS member
ICS member
 
Posts: 900
Joined: Tue Jan 25, 2000 1:34 am
Location: Wisconsin

Re: Gust Lock?

Postby Patrick Reilly » Mon Feb 20, 2012 6:58 pm

Patrick Reilly
 
Posts: 16
Joined: Wed Jan 11, 2012 2:28 am

Re: Gust Lock?

Postby David Pyle » Tue Feb 21, 2012 12:20 am

Pat,

I'm "Dave", not "Dan". Others at ICS have given me many different names. The incredible gust lock is on the way with other goodies.

Zach,

Hand brake? How old fashioned.
713 464 6717
dap8@comcast.net
David Pyle
ICS member
ICS member
 
Posts: 372
Joined: Sat Nov 01, 2003 10:33 pm
Location: Houston

Re: Gust Lock?

Postby Patrick Reilly » Wed Feb 22, 2012 12:42 am

Patrick Reilly
 
Posts: 16
Joined: Wed Jan 11, 2012 2:28 am

Re: Gust Lock?

Postby Zach Grant L1011jock » Tue Feb 28, 2012 5:49 pm

Be very careful with the Ashby gustlock that Dave is sending you. If the aircraft is towed, it can exert stress on the control column as well as the rudder peddles. It is best used when the aircraft is at its final parking position. Also, make sure the the anti-abrasion covers are installed on the hook ends. I can show you my pilots yoke where this device was used by a previous owner, and it chewed up the coating on the bottom cross bar of the yoke. Never install this on the copilots side either. It hides under the panel, and can be missed by the pilot if you are solo and jump across the front seat and strap in to the left.

-Zach
Last edited by Zach Grant L1011jock on Wed Feb 29, 2012 4:39 am, edited 1 time in total.
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Re: Gust Lock?

Postby tomburke1 » Wed Feb 29, 2012 1:28 am

The Ashby gust lock came with a DO NOT TOW flag that attaches to the nose gear.
tomburke1
ICS member
ICS member
 
Posts: 112
Joined: Mon Sep 15, 2003 2:30 pm
Location: Fort Lauderdale fl

Re: Gust Lock?

Postby Jay » Wed Feb 29, 2012 11:03 pm

I use the bungee technique mentioned by Zach. Works well, takes up almost no room or weight.

Jay
Jay
PA 30 N7702Y
User avatar
Jay
ICS member
ICS member
 
Posts: 473
Joined: Tue Sep 30, 2003 10:59 pm
Location: Portland, Oregon


Return to Maintenance - General

Who is online

Users browsing this forum: No registered users and 42 guests

cron