Isolating

Isolating

Postby Billy Matthews » Tue Jun 28, 2011 3:38 pm

I have notice a slight buffeting on the right engine side:

The engine sound good:

The prop's sound like there in sync well the best i can get them: (Do they make a prop sync switch for the twinco?)

Mp is the same:

Everything looks good it's just a constant and slight movement it feel like a slight stopping and then going, I had another pilot go with me on a short trip he thought it might be the prop govenor, they were just overhauled.

Any Suggestions?
Billy Matthews
ICS member
ICS member
 
Posts: 28
Joined: Fri Jul 23, 2010 3:06 pm

Re: Isolating

Postby steen » Wed Jun 29, 2011 2:58 am

Is this at all power and mixtures?
Off the cuff I would say clean the injectors as it takes very little dirt to cause what you describe when leaned in cruise, especially at
higher MP.
Steen
steen
ICS member
ICS member
 
Posts: 168
Joined: Thu Sep 30, 2004 3:24 am
Location: Palatine, Il. USA

Re: Isolating

Postby Zach Grant L1011jock » Wed Jun 29, 2011 4:16 pm

Billy,
If it is truly a miss, then if the props are synched it will jump out of synch at least for a cycle or two. I would bet that you are feeling simple vibration and airframe resonance. Start with new engine mount rubbers, and then have the engine/prop dynamically balanced. Also, play with different rpms and see if the problem follows, or goes away all together.
-Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE


Return to Maintenance - Powerplant

Who is online

Users browsing this forum: No registered users and 11 guests

cron