Alternator Belt

Alternator Belt

Postby Andrew Foster » Sat Mar 05, 2011 6:08 pm

At what interval would it be prudent to change our alternator belt on a 61 250. It's been about 8 years.

Thanks

Andrew
Andrew Foster
ICS member
ICS member
 
Posts: 161
Joined: Fri Dec 31, 2004 9:22 pm

Re: Alternator Belt

Postby Don Nelson » Sat Mar 05, 2011 10:01 pm

I'd say any time it fails, or the prop is already off.
Don
User avatar
Don Nelson
ICS member
ICS member
 
Posts: 312
Joined: Mon Nov 10, 2003 5:57 pm
Location: Burlington, Washington; KBVS

Re: Alternator Belt

Postby Zach Grant L1011jock » Sun Mar 06, 2011 2:14 pm

I would also add it is time to change anytime it is obviously compromised, shows cracking, or has excessive wear. In the case of excessive wear, it is a good idea to find out why as well. It can be a good indication of other problems such as bad bearings in the generator/alternator, or a misaligned or broken bracket. Short of these, and what Don said, there is no change interval that needs to be followed.

Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Re: Alternator Belt

Postby 9089P » Sun Mar 06, 2011 5:15 pm

When you do change it, suggest you go to Nat'l Air Parts of America (NAPA) to get the replacement.

Good luck, Don
9089P
ICS member
ICS member
 
Posts: 426
Joined: Wed Jan 07, 2004 7:01 am

Re: Alternator Belt

Postby Doug David » Sun Mar 13, 2011 5:35 am

Don't go to NAPA, go get a good "Gates Green stripe" or you will be removing the prop for a belt change way before you should have to.....I went through this when I went to a 3 blade & was trying to find the "proper" belt which doesn't exist anymore. The original part number will cross to a Gates number so it is legal, however I found that the "heavy belt" will not quite fit. When it comes to belts & hoses...buy cheap, buy often.....
User avatar
Doug David
ICS member
ICS member
 
Posts: 22
Joined: Wed May 20, 2009 1:17 pm

Re: Alternator Belt

Postby 9089P » Sun Mar 13, 2011 9:33 am

Gates is indeed the one you want. Guess I assumed you get that at napa.

Good luck, Don
9089P
ICS member
ICS member
 
Posts: 426
Joined: Wed Jan 07, 2004 7:01 am


Return to Maintenance - Powerplant

Who is online

Users browsing this forum: No registered users and 0 guests

cron