Webco Wheel and Brake kits

Webco Wheel and Brake kits

Postby Don Nelson » Mon Dec 06, 2010 7:20 pm

Anyone have approved Field Approval paperwork, and experience with changing 250 wheels and brakes to a kit supplied by Webco?

My rivet on brake discs are worn out, as is one of the pressure plates. Would like to renew the whole assemblys, but starting from scratch with a field approval thru Seattle FSDO scares me.

Appreciate any help,
Thanks, Don
User avatar
Don Nelson
ICS member
ICS member
 
Posts: 312
Joined: Mon Nov 10, 2003 5:57 pm
Location: Burlington, Washington; KBVS

Re: Webco Wheel and Brake kits

Postby Jay » Tue Dec 07, 2010 5:34 pm

Don, didn't Piper put the newer type brakes on the later PA 24s? If so, you could take the position that they are approved by the factory and just do a log book entry.

Jay
Jay
PA 30 N7702Y
User avatar
Jay
ICS member
ICS member
 
Posts: 473
Joined: Tue Sep 30, 2003 10:59 pm
Location: Portland, Oregon

Re: Webco Wheel and Brake kits

Postby Don Nelson » Tue Dec 07, 2010 6:27 pm

Thanks Jay,
That may work, especially if all the parts are from the later Comanches, as I believe they are.

Hope my IA agrees.
Don
User avatar
Don Nelson
ICS member
ICS member
 
Posts: 312
Joined: Mon Nov 10, 2003 5:57 pm
Location: Burlington, Washington; KBVS

Re: Webco Wheel and Brake kits

Postby Ray B » Wed Dec 08, 2010 6:19 am

Have you ask Webco if a 337 or field approval is needed for their full replacement kit?
Ray B
ICS member
ICS member
 
Posts: 144
Joined: Wed Dec 23, 2009 6:02 am


Return to Maintenance - Airframe

Who is online

Users browsing this forum: No registered users and 0 guests

cron