Deice

Deice

Postby BusDriver » Tue Oct 26, 2010 9:31 am

Hi All,

Just wondering if twincom owners have noticed any difference in performance between an aircraft fitted with deice boots/props and one without?

Thanks.
BusDriver
ICS member
ICS member
 
Posts: 12
Joined: Wed Oct 20, 2010 7:26 pm

Postby Zach Grant L1011jock » Thu Oct 28, 2010 12:22 am

Yes, It slows it down about 5 kts. Alky props seem to kill about 80-100FPM on the climb as well.
-Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Re: Deice

Postby BusDriver » Sat Oct 30, 2010 6:54 pm

Zach,

Many thnaks for the info.

Regards,

BusDriver.
BusDriver
ICS member
ICS member
 
Posts: 12
Joined: Wed Oct 20, 2010 7:26 pm

Re: Deice

Postby Kristin Winter » Thu Nov 04, 2010 5:36 am

That seems about right, but I haven't run my airplane against another one. That would probably be the test as mine is deiced.
Kristin
User avatar
Kristin Winter
ICS member
ICS member
 
Posts: 1299
Joined: Tue Aug 09, 2005 5:21 pm
Location: Northern California

Re: Deice

Postby steen » Sun Nov 14, 2010 5:32 am

If rate of climb is cut by 80-100fpm, Zach, what must that do to the single-engine alt. capabilities, both drift-down and climb to?
When prop de-ice is added does the STC have limitations of this nature included?

































/
steen
ICS member
ICS member
 
Posts: 168
Joined: Thu Sep 30, 2004 3:24 am
Location: Palatine, Il. USA

Re: Deice

Postby Zach Grant L1011jock » Sun Nov 14, 2010 5:46 am

No, there are no limitations, but these are my experience numbers talking. It does stand to reason that even though the cuff is only on the very inboard area of the prop blade, that it does affect the airflow over that area, and probably has an effect over span wise flow as well. Much like a prop that has eroded leading edges is less efficient than one with polished leading edges. Honesly I doubt that any performance testing was done on the alky prop STC back in the day. If it were done today, I would imagine there might be a performance change.
-Zach

BTW, my turbo twin has alky props. With the props, and the turbos it is not a really stellar climber. It just climbs at the same rate to high altitudes. My NA twin climbed much better initially, but ran out of poop at about 14k with a load.
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Re: Deice

Postby BusDriver » Thu Nov 25, 2010 2:16 pm

Is there a 'hot prop' electric deice option for the Twincom?
BusDriver
ICS member
ICS member
 
Posts: 12
Joined: Wed Oct 20, 2010 7:26 pm


Return to Maintenance - General

Who is online

Users browsing this forum: No registered users and 15 guests

cron