PA-30 fuel valve for heater

PA-30 fuel valve for heater

Postby Edward Rudhman » Sun Aug 22, 2010 10:11 pm

In an attempt to figure out why my heater won't fire up, I discovered the fuel valve mounted to the firewall which is connected to a control knob on the panel leaks fuel. I took it off and took it to the local airfiled parts supply. I don't see this part in the Piper Parts Catalog, or in the Southwind/Stuart-Warner manual. The parts supply outfit couldn't figure out where to get a new one, or if this one is repairable.

Any suggestions? Ed
Edward Rudhman
ICS member
ICS member
 
Posts: 9
Joined: Sun Aug 22, 2010 9:34 pm

Postby Zach Grant L1011jock » Sun Aug 22, 2010 10:15 pm

It should be reparable. Most leak because they get twisted too far and the packing nut turns and the valve gets loose. It is a simple valve that can be disassembled, re packed with ne o rings and then returned to service. Simply tightening the packing nut may also solve the issue. This is a reason to only trat this as a firewall emergency shutoff valve. Turning it every flight causes leaks!
-Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Postby jeffrey aryan » Mon Aug 23, 2010 1:53 am

jeffrey aryan
ICS member
ICS member
 
Posts: 243
Joined: Fri Jan 30, 2004 5:21 am
Location: Chino, CA (So-Cal)

Postby Edward Rudhman » Mon Aug 23, 2010 10:04 am

Edward Rudhman
ICS member
ICS member
 
Posts: 9
Joined: Sun Aug 22, 2010 9:34 pm

Postby Chuck Bauman » Tue Aug 24, 2010 12:48 am

So Zach, Do you mean that we shouldn't open the fuel valve for each flight? Could you expound upon that? I manually open mine every flight In the winter. Thanks a bunch.
Chuck
Chuck Bauman
ICS member
ICS member
 
Posts: 4
Joined: Mon Aug 16, 2010 11:38 pm
Location: Auburn, Michigan


Return to Maintenance - General

Who is online

Users browsing this forum: No registered users and 36 guests

cron