Air pressure in tires and struts

Air pressure in tires and struts

Postby Michael » Tue Mar 09, 2010 6:33 am

I was noticing that a friend with a PA24-250 has his struts pumped way up compared to mine. I asked him and he says he inflates his so his struts are pretty hard. What is the range for inflation on struts? How many PSI are the tires inflated? He has Goodyear Flight Customs III's and I looked at them and I could not locate an inflation pressure. Is there any advantage to having the struts all pumped up? Disadvantages?
Michael
ICS member
ICS member
 
Posts: 55
Joined: Fri Oct 02, 2009 5:55 am

Postby Zach Grant L1011jock » Tue Mar 09, 2010 6:51 am

Proper inflation is 2.75" on all struts. Tire pressure is found in the POH and varies by model aircraft, not by tire. 250's should be 25 nose and 35 mains IIRC. Not looking at the tech docs right now.
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Postby Michael » Wed Mar 10, 2010 4:22 am

Michael
ICS member
ICS member
 
Posts: 55
Joined: Fri Oct 02, 2009 5:55 am

Postby Zach Grant L1011jock » Wed Mar 10, 2010 3:37 pm

"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Postby Michael » Thu Mar 11, 2010 4:54 am

Michael
ICS member
ICS member
 
Posts: 55
Joined: Fri Oct 02, 2009 5:55 am

Postby MULEFLY » Thu Mar 11, 2010 4:10 pm

MULEFLY
ICS member
ICS member
 
Posts: 900
Joined: Tue Jan 25, 2000 1:34 am
Location: Wisconsin

Postby Diller » Thu Mar 11, 2010 6:53 pm

Diller
ICS member
ICS member
 
Posts: 57
Joined: Fri Feb 13, 2009 12:04 am

Postby Michael » Tue Mar 16, 2010 5:14 am

Michael
ICS member
ICS member
 
Posts: 55
Joined: Fri Oct 02, 2009 5:55 am

Hydraulic Fluid, Ruby Red

Postby Michael » Thu Mar 18, 2010 3:05 pm

I purchased some hydraulic fluid from A/C Spruce for my up coming maintainace (annual). I am determined to have Ruby Red fluid in my struts. I bought a gallon of the 5606 Aeroshell and was really surprised to see that this fluid came in a very large can. I thought I would get a resealable container. I wonder if I can transfer the fluid over to a plastic container without contaminating the fluid?
Michael
ICS member
ICS member
 
Posts: 55
Joined: Fri Oct 02, 2009 5:55 am

Postby Zach Grant L1011jock » Sat Mar 20, 2010 1:46 pm

No problem as long as the new container is clean and dry. Once you open the big can, transfer the fluid to something with a tight lid so that you don't get moisture contamination. I keep a couple of pump oil cans full for use to fill reservoirs. I also use an old metal gallon paint stripper can that has been fully decontaminated as a storage can (relabled of course).
-Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Postby Michael » Wed Mar 24, 2010 2:56 pm

Michael
ICS member
ICS member
 
Posts: 55
Joined: Fri Oct 02, 2009 5:55 am

Postby Eddie K. N7439P » Wed Mar 31, 2010 4:48 am

Eddie K. N7439P
ICS member
ICS member
 
Posts: 11
Joined: Fri Jan 09, 2009 8:54 pm
Location: Bozeman, MT & Woodbury, MN

Postby Michael » Sun Apr 04, 2010 2:01 am

Michael
ICS member
ICS member
 
Posts: 55
Joined: Fri Oct 02, 2009 5:55 am


Return to Maintenance - General

Who is online

Users browsing this forum: No registered users and 23 guests

cron