WTB Front Baffle Attach. Bracket -260B

by **Patrick Arnold** » Thu Aug 13, 2009 4:48 am

I discovered today the front baffle attachment bracket (PN 25019-000, item 13 on page 2F10 of the parts manual) on my 260B has been welded at some point. The problem is they shortened it by about 3/4" when they welded it which would normally cause a baffle alignment problem. For my plane someone had rigged up some spacers to make up for the shortened bracket length. I'd like to not do this when I put it back together.

I didn't get a chance to check Webco today but figured I'd ask here to see if anyone had one of these babies laying around.

Thanks,
Pat Arnold

by **Don Nelson** » Thu Aug 13, 2009 9:35 pm

Matt Kurke, Comanche Gear, sells "Engine Baffles".

See his ad on page 35 of the August Flyer.

Don

by **Patrick Arnold** » Fri Aug 14, 2009 3:13 am

Thanks Don, I had my baffles repaired by Matt --he did a super fine job/better than new. I'm looking for the actual baffle bracket I pointed out.

Pat Arnold

by **Paul Williamson** » Sun Sep 06, 2009 6:50 am