Looking for Tip Tanks

Looking for Tip Tanks

Postby EdFred » Thu Jun 18, 2009 6:11 pm

I picked up a '58 250 last month, and after a couple longer XCs (FL->MI, MI->PA, MI->AR) I realize that the 4 hours until silence from the motor isn't quite long enough.

Doesn't matter if they are new or in good used condition. If new, who are the manufacturers to look for? A google search for Comanche Tip Tanks only yields for sale results for entire aircraft, not just the tanks. :cry:

T(h)anks,

Ed
User avatar
EdFred
ICS member
ICS member
 
Posts: 8
Joined: Thu Jun 18, 2009 5:57 pm
Location: Grand Rapids, MI

Tip Tanks

Postby Dale Vandever » Thu Jun 18, 2009 10:24 pm

J. L. Osborne is the only manufacturer of STC 15 gallon tip tanks for the Comanche. Give them a Google search.

Dale
User avatar
Dale Vandever
ICS member
ICS member
 
Posts: 169
Joined: Sun Oct 05, 2003 8:41 am

Postby EdFred » Fri Jun 19, 2009 1:46 pm

Thanks Dale,

They evidently don't want my business, because it's been over a week since I contacted them, and they haven't got back to me on ricing and delivery. I was hoping someone else might be out there. Oh well, such is life, time to be a thorn.
User avatar
EdFred
ICS member
ICS member
 
Posts: 8
Joined: Thu Jun 18, 2009 5:57 pm
Location: Grand Rapids, MI

Postby Zach Grant L1011jock » Wed Jun 24, 2009 1:08 pm

Ed,
Keep after them. When you do get a response they will be helpful. It is a small family business.
-Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Postby N3322G » Wed Jun 24, 2009 1:52 pm

Ed,

Always had great service from Osborne - think I talked with Mary. sorry to hear it has started otherwise for you.
Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Postby EdFred » Wed Jun 24, 2009 8:37 pm

I got a call back from Mary on Monday I believe. Perhaps their form email doesn't work well. I sent a client based email, and I got a call back. Now...do I spend the 6300 plus shipping + installation +, +, +...

?????
User avatar
EdFred
ICS member
ICS member
 
Posts: 8
Joined: Thu Jun 18, 2009 5:57 pm
Location: Grand Rapids, MI

Postby Jay » Wed Jun 24, 2009 10:24 pm

Jay
PA 30 N7702Y
User avatar
Jay
ICS member
ICS member
 
Posts: 473
Joined: Tue Sep 30, 2003 10:59 pm
Location: Portland, Oregon

Postby Chuck Lee » Wed Jun 24, 2009 10:52 pm

User avatar
Chuck Lee
ICS member
ICS member
 
Posts: 45
Joined: Sat Dec 04, 2004 12:09 am

Postby Zach Grant L1011jock » Thu Jun 25, 2009 2:15 am

"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Postby Effie Andree Wiltens » Fri Jun 26, 2009 12:28 pm

User avatar
Effie Andree Wiltens
ICS member
ICS member
 
Posts: 89
Joined: Sun Jan 04, 2009 4:39 pm
Location: Netherlands

Postby Zach Grant L1011jock » Fri Jun 26, 2009 1:12 pm

"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Tip TAnks

Postby Dale Vandever » Fri Jun 26, 2009 2:45 pm

User avatar
Dale Vandever
ICS member
ICS member
 
Posts: 169
Joined: Sun Oct 05, 2003 8:41 am

Postby Charlie Tripp » Fri Jun 26, 2009 2:50 pm

User avatar
Charlie Tripp
ICS member
ICS member
 
Posts: 382
Joined: Thu Jun 27, 2002 5:38 pm
Location: Brownsville, TN

Nose tank extensions

Postby Dale Vandever » Thu Jul 02, 2009 1:45 am


Attached is a photo of an original Brittian tank that Piper installed on a Comanche. The nose would be described as blunt compared with new ones. The next photo show the original Brittian tip tank with the Osborne fiberglass extension shown below it. The next photo is the original tank with the new nose cap attached. The photo order should be viewed 02, then 03 and then 01.

The extensions are available without light fixtures and each side is identical. Those with the lights in the nose require one fixture for the right and another for the left. The hole is just cut on opposite sides.

I don't think that the dies that stamp out the tanks have changed. The new ones just have the pointy end installed.

Dale
Attachments
MVC-002S.JPG
MVC-001S.JPG
MVC-003S.JPG
User avatar
Dale Vandever
ICS member
ICS member
 
Posts: 169
Joined: Sun Oct 05, 2003 8:41 am


Return to Want to buy

Who is online

Users browsing this forum: No registered users and 20 guests

cron