 |
International Comanche Society A maintenance forum for ICS members to share knowledge and learn about their Comanche. Problems? - Contact Administrator at: Webmaster |
Knots 2U Props
15 posts
• Page 1 of 1
Knots 2U Props
by md11flyer » Sun May 31, 2009 4:00 pm
- md11flyer
- ICS member
- Posts: 330
- Joined: Tue Mar 24, 2009 3:48 pm
by jeffrey aryan » Sun May 31, 2009 5:07 pm
- jeffrey aryan
- ICS member
- Posts: 243
- Joined: Fri Jan 30, 2004 5:21 am
- Location: Chino, CA (So-Cal)
Knots 2U Props
by md11flyer » Sun May 31, 2009 6:13 pm
- md11flyer
- ICS member
- Posts: 330
- Joined: Tue Mar 24, 2009 3:48 pm
by Hansmeister » Mon Jun 01, 2009 4:20 am
-
Hansmeister - ICS member
- Posts: 802
- Joined: Thu Jun 27, 2002 5:44 pm
- Location: Kah-li-forn-yah
Knots 2U Props
by md11flyer » Mon Jun 01, 2009 3:10 pm
- md11flyer
- ICS member
- Posts: 330
- Joined: Tue Mar 24, 2009 3:48 pm
by jeffrey aryan » Wed Jun 03, 2009 2:14 am
- jeffrey aryan
- ICS member
- Posts: 243
- Joined: Fri Jan 30, 2004 5:21 am
- Location: Chino, CA (So-Cal)
by charles Melot » Wed Jun 03, 2009 3:30 pm
Removing 1370 hour cylinders is a one way trip. If they are not lamps they will still need everything. if the valves are sealing in a cylinder with oiled plugs the compression is usually 80/80 becasue the excess oil is sealing the rings. My K2U p[rtops are coming up on 5 years with no trouble. didn't gain a knot though.
- charles Melot
- ICS member
- Posts: 57
- Joined: Thu Oct 21, 2004 1:44 pm
- Location: zephyrhills, FL
by steen » Thu Jun 04, 2009 4:32 am
Gary,
At a quart/8hours you should not be concerned, especially with your record of easy starts and smooth running.
I think you are on the way to a 2000 hr. engine as long as the operation remains as it is.
Lycoming is quite generous in their oil consumption allowances and you are not anywhere close to the limits.
Relax and enjoy your Twinkie.
Steen
At a quart/8hours you should not be concerned, especially with your record of easy starts and smooth running.
I think you are on the way to a 2000 hr. engine as long as the operation remains as it is.
Lycoming is quite generous in their oil consumption allowances and you are not anywhere close to the limits.
Relax and enjoy your Twinkie.
Steen
- steen
- ICS member
- Posts: 168
- Joined: Thu Sep 30, 2004 3:24 am
- Location: Palatine, Il. USA
by md11flyer » Fri Jun 05, 2009 11:15 pm
Thanks again guys for your input.
I plan on running the engines as are
as long as they put out the required power and oil consumption remains acceptable. I will also be installing a new engine monitor to check each individual lower plugs before departure and in the mean time run them
lean of peak to save expensive fuel and depending on who you talk to
make the engines last longer!
Happy flying,
Gary
I plan on running the engines as are
as long as they put out the required power and oil consumption remains acceptable. I will also be installing a new engine monitor to check each individual lower plugs before departure and in the mean time run them
lean of peak to save expensive fuel and depending on who you talk to
make the engines last longer!
Happy flying,
Gary
- md11flyer
- ICS member
- Posts: 330
- Joined: Tue Mar 24, 2009 3:48 pm
15 posts
• Page 1 of 1
Return to Maintenance - Powerplant
Who is online
Users browsing this forum: No registered users and 0 guests