GPS / Nav Switch

GPS / Nav Switch

Postby Scott Grand » Sun May 17, 2009 3:35 pm

Any idea where I can get a replacement switch that switches my HSI between the GPS and the NAV?

Thanks

Scott
Scott Grand
ICS member
ICS member
 
Posts: 14
Joined: Thu Apr 02, 2009 1:14 am

Postby VANBLADEREN » Sun May 17, 2009 3:43 pm

Scott, most of the time the switch you ask about is actually a set or relays controlled by a switch or a button on the relay package. What kind of GPS and nav radio do you have and is the system set up as an IFR system?

jvb
VANBLADEREN
ICS BOD member
ICS BOD member
 
Posts: 203
Joined: Fri Jun 01, 2001 8:55 pm

Postby Scott Grand » Sun May 17, 2009 4:03 pm

Northstar M3 GPS and King KNS 80 RNAV. It is set up for IFR operations. The switch no longer seems to be operating. Its currenly on NAV, and will not switch to the GPS. Its a pushbutton type switch, with the top half lighted when its on NAV, and the bottom half lighted on GPS.
Scott Grand
ICS member
ICS member
 
Posts: 14
Joined: Thu Apr 02, 2009 1:14 am

Postby VANBLADEREN » Sun May 17, 2009 4:47 pm

Hello Scott: I doubt that the problem is the switch. You do have a remote relay which defaults to the NAV settings. Pushing the switch applies power to the relay which then goes to the GPS poles. I would check to see if you have dropped a power or ground lead some where.

jvb
VANBLADEREN
ICS BOD member
ICS BOD member
 
Posts: 203
Joined: Fri Jun 01, 2001 8:55 pm

Postby Scott Grand » Sun May 17, 2009 5:00 pm

Thanks, I'll check it out and let you know if that was it!
Scott Grand
ICS member
ICS member
 
Posts: 14
Joined: Thu Apr 02, 2009 1:14 am


Return to Maintenance - Avionics

Who is online

Users browsing this forum: No registered users and 21 guests

cron