Fuel draining is a drag when you're alone

Fuel draining is a drag when you're alone

Postby Effie Andree Wiltens » Thu Mar 12, 2009 4:14 pm

User avatar
Effie Andree Wiltens
ICS member
ICS member
 
Posts: 89
Joined: Sun Jan 04, 2009 4:39 pm
Location: Netherlands

Postby Kristin Winter » Thu Mar 12, 2009 4:21 pm

Kristin
User avatar
Kristin Winter
ICS member
ICS member
 
Posts: 1299
Joined: Tue Aug 09, 2005 5:21 pm
Location: Northern California

Postby AlanBreen » Fri Mar 13, 2009 1:53 am

User avatar
AlanBreen
ICS member
ICS member
 
Posts: 557
Joined: Thu Jun 27, 2002 6:57 am
Location: Hamilton, New Zealand

Postby Effie Andree Wiltens » Fri Mar 13, 2009 1:38 pm

Hmmm... keeping stuff in the container might make them smelly though, or leave contaminants in the container that are indistinguishable from any that might be in the fuel, rendering the drainage process partially pointless. I wouldn't want the container to be too unwieldy for inspection.
I was thinking of something like this -- see attached picture.
[/img]
Attachments
Anti-Spill.jpg
User avatar
Effie Andree Wiltens
ICS member
ICS member
 
Posts: 89
Joined: Sun Jan 04, 2009 4:39 pm
Location: Netherlands

Postby AlanBreen » Fri Mar 13, 2009 9:42 pm

Hello Effie,

We have never had a problem with smell. If you do the fuel drain before you do the rest of the preflight any residual left after the container has been emptied has evapourated.

We have never had a problem with any contamination in the container by storing items in it. At the worst there is some dust particles which are easily tipped out or brushed out with a cloth before doing the fuel drain.

One problem I see with your design is being able to see into the bottom of the container properly to be able to see any water/contamination which will be almost always on the bottom. The narrow neck will impede your view in my opinion. Water can be hard to see sometimes.

By happy coincidence our fuel bucket has "pockets" at the base of the bucket, this is where the contamination gathers. By tipping the bucket carefully the fuel will flow away from one pocket leaving the contamination behind making it very easy to see any contamination.

I have attached a diagram to illustrate.

Alan
Attachments
Fuel bucket.JPG
Fuel bucket.JPG (11.66 KiB) Viewed 1536 times
User avatar
AlanBreen
ICS member
ICS member
 
Posts: 557
Joined: Thu Jun 27, 2002 6:57 am
Location: Hamilton, New Zealand

Postby AlanBreen » Fri Mar 13, 2009 9:57 pm

Hello Effie,

After looking at your picture again it seems that you might be using a glass jar to collect the fuel sample. That will make it easy to see any contaminants. If you were using glass had you considered that possibility of it getting broken or cracked.

Also how easy is it to get under the aircraft to fit the extension tube and then insert it into the jar? Are you intending the leave the tube there all the time?

One of the advantage of a large container, one with a wide opening, is that you don't need much of an extension tube and it can be left there permanently. We have very short plastic ones on our twin and it is quite easy to position the bucket under these without the risk of spillage. Our bucket is quite tall so the top of the bucket is within a few cm of the aircraft belly but a shorter bucket placed on a step or stool would work as well.

Alan
User avatar
AlanBreen
ICS member
ICS member
 
Posts: 557
Joined: Thu Jun 27, 2002 6:57 am
Location: Hamilton, New Zealand

Fuel draining

Postby Trevor Laundy » Mon Mar 16, 2009 8:50 am

Trevor Laundy
PA30 C Turbo non de=iced
User avatar
Trevor Laundy
ICS member
ICS member
 
Posts: 41
Joined: Wed Dec 10, 2003 12:48 am
Location: New Zealand / Great Britain

Postby Effie Andree Wiltens » Wed Mar 18, 2009 5:38 pm

User avatar
Effie Andree Wiltens
ICS member
ICS member
 
Posts: 89
Joined: Sun Jan 04, 2009 4:39 pm
Location: Netherlands

Gats Jars

Postby Trevor Laundy » Thu Mar 19, 2009 10:29 pm

Trevor Laundy
PA30 C Turbo non de=iced
User avatar
Trevor Laundy
ICS member
ICS member
 
Posts: 41
Joined: Wed Dec 10, 2003 12:48 am
Location: New Zealand / Great Britain

Postby Allen Taylor » Fri Mar 20, 2009 5:07 pm

Allen Taylor
ICS member
ICS member
 
Posts: 11
Joined: Sun May 25, 2008 4:48 am

Postby Effie Andree Wiltens » Fri Mar 27, 2009 12:58 pm

User avatar
Effie Andree Wiltens
ICS member
ICS member
 
Posts: 89
Joined: Sun Jan 04, 2009 4:39 pm
Location: Netherlands

Postby AlanBreen » Tue Mar 31, 2009 8:31 pm

User avatar
AlanBreen
ICS member
ICS member
 
Posts: 557
Joined: Thu Jun 27, 2002 6:57 am
Location: Hamilton, New Zealand

Postby Effie Andree Wiltens » Wed Apr 01, 2009 9:20 am

Like you, I have six tanks, and I did wonder about people using a GATS jar. I had doubts about the bottle too, but thought it would be good for testing. 2-3 litres is a lot, it will be hard to find the right kind of container. We're still in a two-man operation acting as safety pilots for each other while we familiarize ourselves with the Comanche, so there is no urgent need for this gadget yet.

Something else cropped up that needs attention: apparently the 120 gallon capacity of our tanks is too big a temptation with fuel proces being what they are here. We’re dipstick-measuring our tanks before and after each flight and there are discrepancies that cannot be attributed to inattentiveness or venting. Fuel has gone missing while the aircraft was parked in the hangar. Not much, about 8-10 litres from tanks that have been used, so that without actual measuring it’s difficult to see. It's not incidental either. A previous time more than 60 liters evaporated, last weekend 27 liters. We’re compiling a record that we can use to start an investigation by airport security or the police. We’re totally pissed off that a member of our airport community should stoop so low to pilfer fuel – also unthinkable that it’s a fellow pilot/owner or a mechanic. Access to the airside of our airport is pretty near impossible for anyone else. It’s crazy that we’re now forced to install locks on our tank caps to protect ourselves from someone who's on the inside. If we can't trust one of them, who can we trust? I am so angry, sorry that this is developing into a rant, I'll stop now.
User avatar
Effie Andree Wiltens
ICS member
ICS member
 
Posts: 89
Joined: Sun Jan 04, 2009 4:39 pm
Location: Netherlands

Postby AlanBreen » Wed Apr 01, 2009 10:11 am

Hello Effie,

Before you get too concerned about someone taking your fuel there are a couple of possible innocent explanations.

One is after you fill the tanks the fuel level can change as the fuel bladders can "settle' a bit after refueling making it look like the fuel level has dropped slightly.

The other thing that can happen (in the twins anyway) is for fuel to syphon from a tip to an aux tank if the solenoid valve selector isn't seating properly or from an aux tank to a main if the selector valve isn't seating properly. The tank receiving the fuel will overflow the fuel into the ground. The obvious indication is the loss of fuel in a tank.

Another likely indication that this is happening is when you remove the cap from the tank that is receiving the fuel, fuel will overflow out of the filler neck.

These are things to consider as reasons for your fuel discrepancies.

Alan
User avatar
AlanBreen
ICS member
ICS member
 
Posts: 557
Joined: Thu Jun 27, 2002 6:57 am
Location: Hamilton, New Zealand

Postby Effie Andree Wiltens » Wed Apr 01, 2009 1:02 pm

I hear what you're saying Alan, but...

(a) could the loss really amount to as much as we have measured within the time of one week?

(b) Fuel also disappeard from the aux tanks.

(c) This was long after tanks are supposed to have settled. More than a week after topping up, with several trips in between.

(d) if fuel transferred from one tank to another, the total would still come out close to whatever was measured before. The difference could surely not be as much as 27 liters (more than 7 gallons)?

(e) A rumour is circulating that the culprit might be the guy with the tow vehicle. We are not the only ones with evaporation problems, it seems. He might be taking a little here and a little there, careful to keep the quantities low so that no one can be completely sure and it's difficult to prove.
User avatar
Effie Andree Wiltens
ICS member
ICS member
 
Posts: 89
Joined: Sun Jan 04, 2009 4:39 pm
Location: Netherlands

Next

Return to ICS General Membership Discussions

Who is online

Users browsing this forum: No registered users and 11 guests

cron