Twinkie Oil Consumption

Twinkie Oil Consumption

Postby Kristin Winter » Sun Oct 19, 2008 5:04 am

Kristin
User avatar
Kristin Winter
ICS member
ICS member
 
Posts: 1299
Joined: Tue Aug 09, 2005 5:21 pm
Location: Northern California

Postby MULEFLY » Sun Oct 19, 2008 1:42 pm

MULEFLY
ICS member
ICS member
 
Posts: 900
Joined: Tue Jan 25, 2000 1:34 am
Location: Wisconsin

Postby Zach Grant L1011jock » Sun Oct 19, 2008 2:54 pm

"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

Postby N3322G » Sun Oct 19, 2008 3:27 pm

User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Postby Kristin Winter » Sun Oct 19, 2008 4:29 pm

Kristin
User avatar
Kristin Winter
ICS member
ICS member
 
Posts: 1299
Joined: Tue Aug 09, 2005 5:21 pm
Location: Northern California

Postby JMH23 » Mon Oct 20, 2008 12:14 pm

JMH23
ICS member
ICS member
 
Posts: 52
Joined: Sun Jan 05, 2003 6:56 pm

Postby JMH23 » Mon Oct 20, 2008 12:25 pm

JMH23
ICS member
ICS member
 
Posts: 52
Joined: Sun Jan 05, 2003 6:56 pm

Postby Kristin Winter » Mon Oct 20, 2008 7:39 pm

Kristin
User avatar
Kristin Winter
ICS member
ICS member
 
Posts: 1299
Joined: Tue Aug 09, 2005 5:21 pm
Location: Northern California

Postby Jay » Mon Oct 20, 2008 9:07 pm

Jay
PA 30 N7702Y
User avatar
Jay
ICS member
ICS member
 
Posts: 473
Joined: Tue Sep 30, 2003 10:59 pm
Location: Portland, Oregon

Twinkie Oil Consumption

Postby SLIMDREDGER » Fri Oct 24, 2008 12:52 am

I haven't kept any precise figures, but I find that long flights result in lower oil consumption per hour than short flights and/or touch and goes.

I average about a quart of oil/10 hours/engine but feel that much of the usage is vapor out the crankcase vent. I always end up with some drip on the pans under the vent pipe after the airplane has been in the hangar overnite. Do others have this, too?

A. H. Powers ICS 2978
SLIMDREDGER
ICS member
ICS member
 
Posts: 306
Joined: Sat Aug 05, 2000 6:20 pm

Postby N3322G » Fri Oct 24, 2008 1:43 am

Hi Al,

I also have had or still have a few drops of oil on the floor. I posted on both forums a couple years back and heard about turbo leaks but nothing that got to the root cause of mine. I started to track them and watch the inside of the cowl when it was removed for annuals.

Finally got the source of one drip and that is my oil quick drains were old and seeping. Just put in new oil drains right before the annual/paint job so don't know enough if this fixed but I think so as the drain fittings have been dry every time I look at them.

The second source has been the vent tubes and they have a tendency to vent when the oil is topped to re-calibrated 6 - I'm still tracking this one but as long as others are interested maybe we'll hear more folks' experiences.

Pat Keefer ICS 08899
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Postby MULEFLY » Fri Oct 24, 2008 2:25 am

MULEFLY
ICS member
ICS member
 
Posts: 900
Joined: Tue Jan 25, 2000 1:34 am
Location: Wisconsin

Postby Jay » Fri Oct 24, 2008 4:43 pm

Jay
PA 30 N7702Y
User avatar
Jay
ICS member
ICS member
 
Posts: 473
Joined: Tue Sep 30, 2003 10:59 pm
Location: Portland, Oregon

Postby Charlie Tripp » Sat Oct 25, 2008 12:04 am

User avatar
Charlie Tripp
ICS member
ICS member
 
Posts: 382
Joined: Thu Jun 27, 2002 5:38 pm
Location: Brownsville, TN

Postby ics-12766 » Sat Oct 25, 2008 2:59 am

Rich Clover
User avatar
ics-12766
ICS member
ICS member
 
Posts: 277
Joined: Fri Oct 22, 2004 6:10 am
Location: Evanston, WY (KEVW)

Next

Return to Maintenance - Powerplant

Who is online

Users browsing this forum: No registered users and 3 guests

cron