Phillips head stainless steel Twin Nose Cowl quarter turn

Phillips head stainless steel Twin Nose Cowl quarter turn

Postby N3322G » Wed Aug 20, 2008 2:43 am

Phillips head stainless steel Twin Nose Cowl quarter turn screws.

I'd like to put these on the Twin after the new paint job but the paint shop has told me they haven't been able to locate any, as supplies seem to have dried up. They have them for the engine cheek cowls but not the nose.

Has anyone seen these latley? Apparently they are shown in catalogs but when you call, no stock.

Any help would be appreciated.

Pat Keefer ICS 08899
User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area

Postby jeffrey aryan » Wed Aug 20, 2008 4:47 am

Pat,

Try this web-site Aircraft and Racing Industries. They have a long list of stuff. The Twin Comanche list is almost cryptic. I think they are asking about $300-600 for a complete kit.

Please let me know if you get one. I will need one in the future and am wondering if it is worth it.

Good Luck,

Jeff Aryan
jeffrey aryan
ICS member
ICS member
 
Posts: 243
Joined: Fri Jan 30, 2004 5:21 am
Location: Chino, CA (So-Cal)

Postby Paul Eckenroth » Tue Sep 30, 2008 1:35 am

Paul Eckenroth
ICS member
ICS member
 
Posts: 20
Joined: Wed May 07, 2008 3:33 pm

Postby N3322G » Tue Sep 30, 2008 8:52 pm

User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area


Return to Want to buy

Who is online

Users browsing this forum: No registered users and 13 guests

cron