Hi Zach,
I also have a IIIB that works perfect EXCEPT when I am in Altitude hold and change to a lower altitude the plane dives at about 1,000 fpm. Is there any way to adjust this rate ?
Thanks
Richard Stanley
 |
International Comanche Society A maintenance forum for ICS members to share knowledge and learn about their Comanche. Problems? - Contact Administrator at: Webmaster |
Altimatic IIIB Wandering
6 posts
• Page 1 of 1
Altimatic IIIB Wandering
by Peter Soderquist » Sat Aug 16, 2008 4:51 am
- Peter Soderquist
- ICS member
- Posts: 48
- Joined: Wed Mar 10, 2004 6:15 am
-
Zach Grant L1011jock - Technical Advisor
- Posts: 1404
- Joined: Mon Mar 22, 2004 4:35 pm
- Location: Indianapolis KEYE
by Peter Soderquist » Mon Aug 18, 2008 1:09 am
- Peter Soderquist
- ICS member
- Posts: 48
- Joined: Wed Mar 10, 2004 6:15 am
by Zach Grant L1011jock » Mon Aug 18, 2008 11:51 am
Richard,
Yes there is. It is a rate pot on the control head behind the face plate. A good place to start would be a phone call to Muncie Aviation. Ask for Rocky or Kenny in avionics, and be ready for indepth questions and way more info than you want! The phone is 800-289-7141. If they ask, tell them I told you to call (i'm sure they will add it to the bill on my next visit....
-zach
Yes there is. It is a rate pot on the control head behind the face plate. A good place to start would be a phone call to Muncie Aviation. Ask for Rocky or Kenny in avionics, and be ready for indepth questions and way more info than you want! The phone is 800-289-7141. If they ask, tell them I told you to call (i'm sure they will add it to the bill on my next visit....
-zach
"Keep it above 5 feet and don't do nuthin dumb!"
-
Zach Grant L1011jock - Technical Advisor
- Posts: 1404
- Joined: Mon Mar 22, 2004 4:35 pm
- Location: Indianapolis KEYE
6 posts
• Page 1 of 1
Return to Maintenance - Avionics
Who is online
Users browsing this forum: No registered users and 5 guests