Nate, try Office Depot.
Dale
 |
International Comanche Society A maintenance forum for ICS members to share knowledge and learn about their Comanche. Problems? - Contact Administrator at: Webmaster |
Powercoat or Paint a new panel?
25 posts
• Page 1 of 2 • 1, 2
Powercoat or Paint a new panel?
by Nate Zieman » Sat Jul 26, 2008 8:03 pm
-
Nate Zieman - ICS member
- Posts: 55
- Joined: Sun May 11, 2008 7:26 pm
- Location: Florida
by Nate Zieman » Mon Jul 28, 2008 3:33 am
-
Nate Zieman - ICS member
- Posts: 55
- Joined: Sun May 11, 2008 7:26 pm
- Location: Florida
by Nate Zieman » Mon Jul 28, 2008 2:23 pm
-
Nate Zieman - ICS member
- Posts: 55
- Joined: Sun May 11, 2008 7:26 pm
- Location: Florida
by Nate Zieman » Mon Jul 28, 2008 5:26 pm
-
Nate Zieman - ICS member
- Posts: 55
- Joined: Sun May 11, 2008 7:26 pm
- Location: Florida
by Nate Zieman » Tue Jul 29, 2008 12:33 am
-
Nate Zieman - ICS member
- Posts: 55
- Joined: Sun May 11, 2008 7:26 pm
- Location: Florida
by Nate Zieman » Tue Jul 29, 2008 1:33 am
-
Nate Zieman - ICS member
- Posts: 55
- Joined: Sun May 11, 2008 7:26 pm
- Location: Florida
by Nate Zieman » Sat Aug 02, 2008 1:50 am
-
Nate Zieman - ICS member
- Posts: 55
- Joined: Sun May 11, 2008 7:26 pm
- Location: Florida
letters
by Dale Vandever » Sat Aug 02, 2008 1:57 am
-
Dale Vandever - ICS member
- Posts: 169
- Joined: Sun Oct 05, 2003 8:41 am
by AlanBreen » Sat Aug 02, 2008 2:32 am
Hi Nate,
Take a look at this picture of our panel as it is at present. I am sorry the focus isn't all that good. You will see several labels on there. These were done at local sign shop.
We have two aircraft manufacturers based locally and I found a shop who did this sort of work for them.
By the way the letters are not cut they are printed onto the backing that sticks to the panel. They wear very well, the only area where we have had a problem is where the edge of the label gets caught with a finger nail the edges lifts and the label starts to peel. This only happens of the label is by a switch or knob that is being regularly used.
Alan
Take a look at this picture of our panel as it is at present. I am sorry the focus isn't all that good. You will see several labels on there. These were done at local sign shop.
We have two aircraft manufacturers based locally and I found a shop who did this sort of work for them.
By the way the letters are not cut they are printed onto the backing that sticks to the panel. They wear very well, the only area where we have had a problem is where the edge of the label gets caught with a finger nail the edges lifts and the label starts to peel. This only happens of the label is by a switch or knob that is being regularly used.
Alan
- Attachments
-
-
AlanBreen - ICS member
- Posts: 557
- Joined: Thu Jun 27, 2002 6:57 am
- Location: Hamilton, New Zealand
25 posts
• Page 1 of 2 • 1, 2
Return to Maintenance - General
Who is online
Users browsing this forum: No registered users and 7 guests