Oil Breather

by **L Blandina** » Wed Jun 20, 2012 2:04 pm

I am looking for original oil breather tubing and related fittings for IO-540/260B model. Want to convert back from air/oil separator.

Thanks
Lee Blandina
16973

by **N3322G** » Wed Jun 20, 2012 6:16 pm

Lee,

Try Webco. a few years back I needed a new breather for the twin and they had one.

by **Jay** » Thu Jun 21, 2012 5:01 pm

What Pat said. Made the conversion back last year on a PA-30 (needed to make room for spin on oil filters for the turbos).

Jay

by **L Blandina** » Fri Jun 22, 2012 3:24 pm

Pat and Jay

I tried Webco last year and they had nothing at that time. I might try them again or other yards.

Thanks
Lee Blandina

by **N3322G** » Fri Jun 22, 2012 5:01 pm

Lee, if you look up the part number on the tech tab on this website, you might try googling it - that has worked well for me.

ASOD.com is featured in AOPA this month and Lucky is Comanche Adviser so you might try them as well.

by **Clarence Beintema** » Thu Aug 23, 2012 1:51 am

Hi Lee,

Did you find a breather tube? I've made them in the past and can explain the process to you.

Clarence Beintema
Tri-City Aero
519-648-2044

PA24-400, CFMYB

by **L Blandina** » Thu Aug 23, 2012 4:15 pm

Hello Clarence

No, I have not found the breather parts yet. I was going to try and copy another 260 installation when I can get around to it. It is the routing of the tubing that concerns me as I want to have it back to original.

Thanks
Lee Blandina

Oil Breather

Oil Breather

Re: Oil Breather

Re: Oil Breather

Re: Oil Breather

Re: Oil Breather

Re: Oil Breather

Re: Oil Breather

Who is online