Need Left Main Landing Gear Trunion for 260-C

[Dusty Wall]

I have the infamous crack at the bolt hole in my left trunion. It is deep enough to leak 5606 from inside the bore. Cliff has sent mine to S&B but my fear is that the crack may have progressed too far into the bore for them to repair. In that case I need a plan B! Does anyone know of a serviceable salvage anywhere? Cliff and the guys at heritage have my plane, and thought they had one but it was for an earlier model and not as beefy as the one that comes on the C models. I have spoken with Matt Kurke and he has one but it's a little nicer than what I need to get going again. Thanks!-- Dusty

[N3322G]

have you checked ASOD.com Lucky Loque is a Comanche guru

[N3322G]

or google the part #

[Ian Thomson]

I have a LH Australian heavy duty design trunnion removed from parted out Comanche.
Available with US STC5A03708AT. Never need to worry about Cracking ever again.
Can be supplied with all necessary documentation.
Contact me at ian@thomsonimports.com if interested.

[N3322G]

S&B welding in Utah for welding repairs

[Timothy Poole]

Try Tim at JT Evans. jtevans@aircraftsalesinc.com

They had trunnions for our PA-28R and our PA-30 when we needed them.

Tim

[Kristin Winter]

J.T. Evans is my last go-to as he is often very pricey.