PA-30 Shadin Fuel Flow Install Instructions

[David Pfeffer]

Hey gang,
Does anyone have the installation instructions for the J.L Osborne STC for installation of the Shadin Fuel Flow Indicator (p/n: 910532) with Fuel Flow Transducers, p/n: 680501 in the PA-30?

The unit is installed in my new-to-me PA-30, but no paperwork. Some of the logs are missing and there's no 337 on record. I'll be submitting a 337 verifying the previous install, but obviously want to ensure its installed per the STC prior to putting my name on it. I'm sure Osborne would sell me the instructions, but if someone has a copy from their install, I'd be very grateful to see it to verify mine.

Thanks!!
David
David.D.Pfeffer@gmail.com

[N3322G]

Have the tip tank install instructions - will copy and send to your address as it shows in Pathfinder.

[David Pfeffer]

Pat,
Greatly appreciated, but just looking for the Shadin Fuel Flow install instructions, not the tip tanks.

Thanks!!
David

[N3322G]

David,

I have the Shadin operating manual only.

Other Shadin manuals appear to be online at http://www.shadin.com/service/fuelflowtechpubs.html

My understanding is Osborne has the STC permission to use Shadin fuel computers as replacement for the original Piper fuel flow gauge ... much like Hartzell makes the cruise props but Knots2U has the STC.

Hope this helps. Recognize I am simply an owner with these products trying to help - not intending to tell you what is FAA legal.

[David Pfeffer]

No, I completely understand Pat, and you're correct. J.L Osborne owns the STC, so Shadin doesn't even have the STC install instructions. Looks like I'll just buy the paper from them unless someone turns up with it. I do have the Shadin manuals.

Thanks!!
David