Does anyone know if there is a STC still out there or have a copy of an old one to do the 200 hp conversion?
I'd also like to do counter rotating.
 |
International Comanche Society A maintenance forum for ICS members to share knowledge and learn about their Comanche. Problems? - Contact Administrator at: Webmaster |
PA30 200 hp conversion
4 posts
• Page 1 of 1
Re: PA30 200 hp conversion
by Dave Fitzgerald » Sat Aug 18, 2012 5:17 pm
Greetings Michael,
John Bailey from Knots2U has the Miller Conversion STC now. I'm not sure if he's doing the 200 hp conversion but he would be your best source for information.
Knots 2U, Ltd.
709 Airport Road
Burlington, WI 53105
262 763 5100 Phone
262 763 5125 Fax
As far as the counter rotating -- most people will tell you it isn't worth effort or money.
I've had one 1963 PA30 without it and now have a PA39 with it and can't really tell the difference.
John Bailey from Knots2U has the Miller Conversion STC now. I'm not sure if he's doing the 200 hp conversion but he would be your best source for information.
Knots 2U, Ltd.
709 Airport Road
Burlington, WI 53105
262 763 5100 Phone
262 763 5125 Fax
As far as the counter rotating -- most people will tell you it isn't worth effort or money.
I've had one 1963 PA30 without it and now have a PA39 with it and can't really tell the difference.
Dave Fitzgerald
-
Dave Fitzgerald - Site Admin
- Posts: 95
- Joined: Sat Jun 21, 2003 3:49 am
- Location: Canton, Ohio
Re: PA30 200 hp conversion
by md11flyer » Sun Aug 19, 2012 3:40 pm
Counter rotators are slower... but with 200HP don't think that will be a problem, 
Cheers,
Gary
Cheers,
Gary
- md11flyer
- ICS member
- Posts: 330
- Joined: Tue Mar 24, 2009 3:48 pm
Re: PA30 200 hp conversion
by Michael Bronzburg » Mon Aug 20, 2012 10:02 am
Thanks for the info
Mike Bronzburg
-
Michael Bronzburg - Posts: 4
- Joined: Thu May 03, 2012 12:46 am
4 posts
• Page 1 of 1
Return to Maintenance - Powerplant
Who is online
Users browsing this forum: No registered users and 32 guests