 |
International Comanche Society A maintenance forum for ICS members to share knowledge and learn about their Comanche. Problems? - Contact Administrator at: Webmaster |
Oil Cooler Overhauls
6 posts
• Page 1 of 1
Oil Cooler Overhauls
by tomgo2 » Sat Mar 06, 2010 9:57 pm
- tomgo2
- ICS member
- Posts: 20
- Joined: Mon Mar 23, 2009 2:13 am
by tomgo2 » Mon Mar 08, 2010 4:25 pm
Do I have to purchase the exact oil cooler specified in the twin comanche manual (24577-00) or is there an alternate part number and manufacturer that has PMA that someone can recommend? I should also mention that I have a PA30 with serial number 909 with the turbo mod.
- tomgo2
- ICS member
- Posts: 20
- Joined: Mon Mar 23, 2009 2:13 am
by CLIPCLIP » Tue Mar 09, 2010 4:19 am
"I should also mention that I have a PA30 with serial number 909 with the turbo mod"
i will assume you have the IO320B1A engines, with the rayjay turbonormalizers. if that is the case, you need the Harrison oil coolers with (IIRC) 9 blades. the stock oil coolers (7 blades?) will provide insufficient cooling.
here's what i ordered a few years back from Pacific Oil Coolers:
#8529245 Harrison 9 blade is their #800 0074
the 800 0215 has 13 rows, a few rayjay installs have this cooler...
francois
i will assume you have the IO320B1A engines, with the rayjay turbonormalizers. if that is the case, you need the Harrison oil coolers with (IIRC) 9 blades. the stock oil coolers (7 blades?) will provide insufficient cooling.
here's what i ordered a few years back from Pacific Oil Coolers:
#8529245 Harrison 9 blade is their #800 0074
the 800 0215 has 13 rows, a few rayjay installs have this cooler...
francois
- CLIPCLIP
- ICS member
- Posts: 97
- Joined: Thu Dec 23, 1999 2:06 am
- Location: Montreal, Quebec, Canada
6 posts
• Page 1 of 1
Return to Maintenance - Powerplant
Who is online
Users browsing this forum: No registered users and 17 guests